- Dump Clearance At Max Raise: 3.35 ft / 1020 mm
- Breakout Force: 10948.2 lb / 48.7 kN
- Bucket Capacity - Heaped: 1.18 yd3 / 0.9 m3
- Ground Clearance: 1.45 ft / 440 mm
Published dimensions and weight
Case 221F
The Case 221F is a 5.7 t-class wheel loader with a 70 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight12546.6 lb5691 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 221F include published bucket capacity of 1.18 yd3 / 0.9 m3, published breakout force of 10948.2 lb / 48.7 kN, published operating weight of 12546.6 lb / 5691 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (3.35 ft / 1020 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (10948.2 lb / 48.7 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.18 yd3 / 0.9 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise3.35 ft1020 mm
Breakout Force10948.2 lb48.7 kN
Bucket Capacity - Heaped1.18 yd30.9 m3
Dimensions
Ground Clearance1.45 ft440 mm
Length With Bucket On Ground19.26 ft5869 mm
Width Over Tires6.11 ft1860 mm
Height To Top Of Cab8.62 ft2627 mm
Wheelbase7.3 ft2225 mm
Hinge Pin - Max Height10.8 ft3290 mm
Reach At Max Lift And Dump3.35 ft1020 mm
Angle Of Departure27 degrees27 degrees
Engine
Emissions CertificationFinal Tier 4Final Tier 4
FuelDieselDiesel
Fuel InjectionHigh pressure, common rail injectionHigh pressure, common rail injection
Radiator Core TypeAll aluminiumAll aluminium
Air Filter TypeDry type element with warning restriction indicatorDry type element with warning restriction indicator
Number Of Cylinders44
Engine ModelFPT F5H FL463 A F004FPT F5H FL463 A F004
Engine Type4-stroke4-stroke
Net Power70 hp52.2 kw
Gross Power74 hp55.2 kw
Power Measured @2500 rpm2500 rpm
Max TorqueGross - 316 Nm, 233 lb ft, Net - 308 Nm, 227 lb ftGross - 316 Nm, 233 lb ft, Net - 308 Nm, 227 lb ft
Displacement207 cu in3.4 L
Torque Measured @1400 rpm1400 rpm
Bore3.9 in99.1 mm
Stroke4.3 in109.3 mm
Operational
Operating Weight12546.6 lb5691 kg
Fuel Capacity22.8 gal86 L
Hydraulic System Fluid Capacity14.1 gal53 L
Engine Oil Fluid Capacity1.9 gal7 L
Cooling System Fluid Capacity3.5 gal13 L
Front Axle/Diff Fluid Capacity2.3 gal8.7 L
Rear Axle/Diff Fluid Capacity2.7 gal10 L
Electrical
Voltage12 V12 V
Alternator120 amps120 amps
Batteries95 AHR, 900 CCA95 AHR, 900 CCA
Transmission
Transmission TypeHydrostatic transmissionHydrostatic transmission
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward11.4 mph18.3 km/h
Max Speed - Reverse11.4 mph18.3 km/h
Hydraulic System
Standard Pressure3626 psi25000.4 kPa
Pump Flow Capacity22.5 gal/min85 L/min
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.