- Dump Clearance At Max Raise: 8.53 ft / 2598 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1.01 m3
- Bucket Capacity - Struck: 1.1 yd3 / 0.84 m3
- Bucket Width: 6.89 ft / 2100 mm
Published dimensions and weight
Case 221E
The Case 221E is a wheel loader of about 5.4 t; its F4M2011, Tier 2 certified engine is rated at 59 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11947 lb5419 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 221E include published bucket capacity of 1.31 yd3 / 1.01 m3, published breakout force of 9723 lb / 4410 kN, published operating weight of 11947 lb / 5419 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.53 ft / 2598 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1.01 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.1 yd3 / 0.84 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.53 ft2598 mm
Bucket Capacity - Heaped1.31 yd31.01 m3
Bucket Capacity - Struck1.1 yd30.84 m3
Bucket Width6.89 ft2100 mm
Breakout Force9723 lb4410 kN
Dimensions
Ground Clearance1.08 ft330 mm
Length With Bucket On Ground18.49 ft5635 mm
Width Over Tires6.25 ft1904 mm
Height To Top Of Cab9.17 ft2793 mm
Wheelbase7.71 ft2350 mm
Hinge Pin - Max Height11.11 ft3386 mm
Reach At Max Lift And Dump2.85 ft867 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelF4M2011, Tier 2 certifiedF4M2011, Tier 2 certified
Net Power59 hp43 kw
Gross Power60 hp45 kw
Power Measured @2500 rpm2500 rpm
Max Torque131 lb ft178 Nm
Displacement190 cu in3.2 L
Torque Measured @1700 rpm1700 rpm
Operational
Operating Weight11947 lb5419 kg
Fuel Capacity26 gal100 L
Hydraulic System Fluid Capacity17.7 gal67 L
Engine Oil Fluid Capacity2.7 gal10 L
Front Axle/Diff Fluid Capacity2.1 gal8 L
Rear Axle/Diff Fluid Capacity2.1 gal8 L
Static Tipping Weight9358 lb4245 kg
Turning Radius13.5 ft4095 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size365/80 R20 EM SPT9365/80 R20 EM SPT9
Transmission
Transmission TypeHydrostatic transmissionHydrostatic transmission
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3626 psi23000 kPa
Pump Flow Capacity18.5 gal/min70 L/min
Raise Time6 sec6 sec
Dump Time1 sec1 sec
Lower Time3 sec3 sec
Pump TypeOpen-centered pressure/flow compensatedOpen-centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.