- Dump Clearance At Max Raise: 8.22 ft / 2503 mm
- Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
- Bucket Capacity - Struck: 1.09 yd3 / 0.83 m3
- Bucket Width: 6.89 ft / 2100 mm
Published dimensions and weight
Case 221D
The Case 221D pairs the F4M2011 engine (57.5 hp) with an operating weight near 5.3 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11793 lb5349.3 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 221D include published bucket capacity of 1.31 yd3 / 1 m3, published breakout force of 12182 lb, published operating weight of 11793 lb / 5349.3 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.22 ft / 2503 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.09 yd3 / 0.83 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.22 ft2503 mm
Bucket Capacity - Heaped1.31 yd31 m3
Bucket Capacity - Struck1.09 yd30.83 m3
Bucket Width6.89 ft2100 mm
Breakout Force12182 lb12182 -
Dimensions
Ground Clearance1.19 ft360 mm
Length With Bucket On Ground17.61 ft5365 mm
Width Over Tires6.25 ft1904 mm
Height To Top Of Cab9.17 ft2793 mm
Wheelbase7.39 ft2250 mm
Hinge Pin - Max Height10.44 ft3182 mm
Reach At Max Lift And Dump2.59 ft789 mm
Engine
Number Of Cylinders44
Engine Make23492349
Engine ModelF4M2011F4M2011
Net Power57.5 hp42.9 kw
Gross Power60.5 hp45.2 kw
Power Measured @2500 rpm2500 rpm
Max Torque136 lb ft184.4 Nm
Displacement190 cu in3.2 L
Torque Measured @1700 rpm1700 rpm
Torque Rise9 %9 %
Operational
Operating Weight11793 lb5349.3 kg
Fuel Capacity26.4 gal100 L
Hydraulic System Fluid Capacity4.1 gal15.5 L
Engine Oil Fluid Capacity2.3 gal8.5 L
Cooling System Fluid Capacity3.2 gal12 L
Front Axle/Diff Fluid Capacity1 gal3.7 L
Rear Axle/Diff Fluid Capacity1 gal3.7 L
Static Tipping Weight8873.7 lb4025 kg
Turning Radius13 ft3961 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage55 amps55 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size365/80 R20365/80 R20
Transmission
Transmission Typehydrostatichydrostatic
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.4 mph20 km/h
Max Speed - Reverse12.4 mph20 km/h
Hydraulic System
Relief Valve Setting3335 psi159.7 kPa
Pump Flow Capacity17.4 gal/min65.9 L/min
Raise Time5.5 sec5.5 sec
Dump Time1.1 sec1.1 sec
Lower Time3 sec3 sec
Pump Typeopen-centered pressure/flow compensatedopen-centered pressure/flow compensated
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.