- Dump Clearance At Max Raise: 3.14 ft / 957 mm
- Breakout Force: 9194.69 lb / 40.9 kN
- Bucket Capacity - Heaped: 0.92 yd3 / 0.7 m3
- Ground Clearance: 1.46 ft / 444 mm
Published dimensions and weight
Case 21F
The Case 21F is a wheel loader of about 5.1 t, powered by a 55 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11272.3 lb5113 kg
03Selected published values45
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Case 21F include published bucket capacity of 0.92 yd3 / 0.7 m3, published breakout force of 9194.69 lb / 40.9 kN, published operating weight of 11272.3 lb / 5113 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (3.14 ft / 957 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (9194.69 lb / 40.9 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.92 yd3 / 0.7 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise3.14 ft957 mm
Breakout Force9194.69 lb40.9 kN
Bucket Capacity - Heaped0.92 yd30.7 m3
Dimensions
Ground Clearance1.46 ft444 mm
Length With Bucket On Ground18.21 ft5549 mm
Width Over Tires5.71 ft1740 mm
Height To Top Of Cab8.07 ft2458 mm
Wheelbase6.81 ft2075 mm
Hinge Pin - Max Height10.29 ft3136 mm
Reach At Max Lift And Dump3.14 ft957 mm
Angle Of Departure28 degrees28 degrees
Engine
Emissions CertificationFinal Tier 4Final Tier 4
FuelDieselDiesel
Fuel InjectionHigh pressure, common rail injectionHigh pressure, common rail injection
Radiator Core TypeAll aluminiumAll aluminium
Air Filter TypeDry type element with warning restriction indicatorDry type element with warning restriction indicator
Number Of Cylinders44
Engine ModelFPT F5H FL463 B F001FPT F5H FL463 B F001
Engine Type4-stroke4-stroke
Net Power55 hp41.1 kw
Gross Power58 hp43.3 kw
Power Measured @2500 rpm2500 rpm
Max Torque245 Nm, 181 lb ft245 Nm, 181 lb ft
Displacement207 cu in3.4 L
Torque Measured @1400 rpm1400 rpm
Bore3.9 in99.1 mm
Stroke4.3 in109.3 mm
Operational
Operating Weight11272.3 lb5113 kg
Fuel Capacity22.8 gal86 L
Hydraulic System Fluid Capacity14.1 gal53 L
Engine Oil Fluid Capacity1.9 gal7 L
Cooling System Fluid Capacity3.5 gal13 L
Front Axle/Diff Fluid Capacity2.2 gal8.2 L
Rear Axle/Diff Fluid Capacity2.6 gal9.5 L
Electrical
Voltage12 V12 V
Alternator120 amps120 amps
Batteries95 AHR, 900 CCA95 AHR, 900 CCA
Transmission
Transmission TypeHydrostatic transmissionHydrostatic transmission
Number Of Forward Gears22
Number Of Reverse Gears22
Max Speed - Forward12.5 mph20 km/h
Max Speed - Reverse12.5 mph20 km/h
Hydraulic System
Standard Pressure3626 psi25000.4 kPa
Pump Flow Capacity17.7 gal/min67 L/min
Pump TypeGearGear
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.