- Length With Blade On Ground: 43.98 ft / 13405 mm
- Ground Clearance: 2.27 ft / 691 mm
- Height To Top Of Cab: 18.34 ft / 5590 mm
- Wheelbase: 19.33 ft / 5890 mm
Published dimensions and weight
Caterpillar 854K
The Caterpillar 854K is a wheel dozer of about 98.5 t, built around the C32 Acert engine.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight217128.9 lb98488 kg
03Selected published values98
Wheel dozers are commonly used to push, spread and clean up material where wheeled mobility is useful. Published rows for Caterpillar 854K include published operating weight of 217128.9 lb / 98488 kg, published engine power of 907 hp / 676.4 kw, the published “Length With Blade On Ground” field of 43.98 ft / 13405 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length With Blade On Ground” field (43.98 ft / 13405 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (2.27 ft / 691 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Height To Top Of Cab” field (18.34 ft / 5590 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length With Blade On Ground43.98 ft13405 mm
Ground Clearance2.27 ft691 mm
Height To Top Of Cab18.34 ft5590 mm
Wheelbase19.33 ft5890 mm
Dimensions (Approximate)
Ground Clearance2.25 in0.06 m
Length - With Blade On Ground44 ft13.42 m
Wheel Base19.25 ft5.87 m
Height - Top Of Rops18.25 ft5.57 m
Centerline Of Rear Axle To Edge Of Bumper13.75 ft4.2 m
Height - Top Of Exhaust Pipe17.18 ft5.24 m
Height - Top Of Hood13 ft3.97 m
Centerline Of Front Axle To Hitch9.67 ft2.95 m
Engine
Number Of Cylinders1212
Engine Make22362236
Engine ModelC32 AcertC32 Acert
Gross Power907 hp676.4 kw
Net Power800.6 hp597 kw
Power Measured @1750 rpm1750 rpm
Rated Speed1750 rpm1750 rpm
Net Torque3129 lb ft4242.4 Nm
Torque Rise30 %30 %
Displacement1958.9 cu in32.1 L
Aspirationturbochargedturbocharged
Bore5.7 in144.8 mm
Stroke6.4 in162.6 mm
Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)Net torque rise meets SAE J139.Net torque rise meets SAE J139.
Note (3)No engine derating required up to 3050 m (10,000 ft) altitude.No engine derating required up to 3050 m (10,000 ft) altitude.
Peak Torque - 1,200 Rpm3139 lb ft4256 Nm
Emissions (U.S. Epa Tier 4 Final): Gross Power - Sae J1995900 hp671.2 kw
Emissions (Tier 2 Equivalent): Gross Power - Sae J1995907 hp676.4 kw
Emissions (U.S. Epa Tier 4 Final): Net Power Iso - 9249814 hp607 kw
Emissions (Tier 2 Equivalent): Net Power Iso - 9249814 hp607 kw
Operational
Operating Weight217128.9 lb98488 kg
Fuel Capacity412.7 gal1562 L
Cooling System Fluid Capacity52.9 gal200 L
Engine Oil Capacity31.8 gal120 L
Transmission Fluid Capacity44.7 gal169 L
Front Diff Fluid Capacity97.5 gal369 L
Rear Diff Fluid Capacity90.4 gal342 L
Operating Voltage24 V24 V
Alternator Supplied Amperage150 amps150 amps
Tire Size45/65-R4545/65-R45
Transmission
Transmission TypeCat Planetary Power ShiftCat Planetary Power Shift
Number Of Forward Gears33
Number Of Reverse Gears33
Max Speed - Forward13.2 mph21.2 km/h
Max Speed - Reverse14.7 mph23.5 km/h
NoteTravel speeds based on 45/65-45 L-5 46 ply tires.Travel speeds based on 45/65-45 L-5 46 ply tires.
Direct Drive - Forward 314.2 mph22.9 km/h
Direct Drive - Reverse 315.6 mph25.2 km/h
Direct Drive - Forward 28.1 mph13.1 km/h
Direct Drive - Reverse 28.9 mph14.4 km/h
Converter Drive - Forward 313.2 mph21.3 km/h
Converter Drive - Reverse 314.6 mph23.5 km/h
Direct Drive - Forward 1Lock-up disabledLock-up disabled
Converter Drive - Forward 14.4 mph7.1 km/h
Converter Drive - Forward 27.7 mph12.4 km/h
Direct Drive - Reverse 15 mph8.1 km/h
Converter Drive - Reverse 14.8 mph7.8 km/h
Converter Drive - Reverse 28.4 mph13.6 km/h
Steering
Total Steering Angle86 degrees86 degrees
Relief Valve Setting5004 psi5004 psi
Hydraulic Output At 1,850 Rpm And 6900 Kpa (1,000 Psi)124 gal/min124 gal/min
Minimum Turning Radius31 ft9.5 m
Weights
Operating Weight224254 lb101720 kg
Blade
Blade Capacity33.3 yd325.4 m3
Blade Width20.8 ft6321 mm
Blade Height7.2 ft2179 mm
Axles
FrontFixedFixed
RearOscillating at 10 degreesOscillating at 10 degrees
Maximum Single-Wheel Rise And Fall22.6 in574.1 mm
Brakes
BrakesMeets ISO 3540:2011Meets ISO 3540:2011
Service Refill Capacities
Cooling System53 gal200.7 L
Crankcase32 gal121.2 L
Fuel Tank - Standard413 gal1563.4 L
Transmission45 gal170.4 L
Differential - Final Drives - Front98 gal371 L
Differential - Final Drives - Rear90 gal340.7 L
Hydraulic System - Implement And Brakes - Tank Only81 gal306.7 L
Hydraulic System - Steering And Engine Cooling Fan - Tank Only77 gal291.5 L
Hydraulic System - Lift/Tilt
Cylinders, Double Acting - Lift, Bore And Stroke177 mm 1760 mm (0.58 ft 5.8 ft)177 mm 1760 mm (0.58 ft 5.8 ft)
Cylinder, Double Acting - Tilt And Tip, Bore And Stroke267 mm 286 mm (0.88 ft 0.94 ft)267 mm 286 mm (0.88 ft 0.94 ft)
Output At 1,850 Rpm And 6900 Kpa (1,000 Psi)161 gal/min161 gal/min
Relief Valve Setting - Lift (Large Pump)3289 psi3289 psi
Relief Valve Setting - Tilt (Small Pump)3560 psi3560 psi
Cab
Air ConditioningStandard air conditioning system contains environmentally friendly R134a refrigerantStandard air conditioning system contains environmentally friendly R134a refrigerant
RopsROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria.
FopsFOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Cab - Rops/Fops (2)SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005
Cab - Rops/Fops (1)Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Sound Performance (4)The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A).
Sound Performance (3)Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Performance (2)The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A).
Sound Performance (1)The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab.
Blades
Blade Capacities25 to 45 m (33 to 58 yd)25 to 45 m (33 to 58 yd)
Model 854k (Tier 2)
Serial Number PrefixRM6RM6
Model 854k (Tier 4)
Serial Number PrefixKK6KK6
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.