- Length With Blade On Ground: 27.2 ft / 8290 mm
- Width Over Tires: 14.8 ft / 4510 mm
- Ground Clearance: 1.3 ft / 396.24 mm
- Height To Top Of Cab: 12.14 ft / 3700 mm
Published dimensions and weight
Caterpillar 824G Series II
The Caterpillar 824G Series II is a wheel dozer of about 28.7 t; its 3176C ATAAC engine is rated at 339.3 hp.
01Published dimensions and weight
Dimensions reference
Representative category illustration; exact model may differ.Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight63325.6 lb28724 kg
03Selected published values84
Wheel dozers are commonly used to push, spread and clean up material where wheeled mobility is useful. Published rows for Caterpillar 824G Series II include published operating weight of 63325.6 lb / 28724 kg, published engine power of 339.3 hp / 253 kw, the published “Length With Blade On Ground” field of 27.2 ft / 8290 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length With Blade On Ground” field (27.2 ft / 8290 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (14.8 ft / 4510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (1.3 ft / 396.24 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length With Blade On Ground27.2 ft8290 mm
Width Over Tires14.8 ft4510 mm
Ground Clearance1.3 ft396.24 mm
Height To Top Of Cab12.14 ft3700 mm
Wheelbase12.14 ft3700 mm
Height - Top Of Exhaust Pipe138 in3505.2 mm
Centerline Of Rear Axle To Edge Of Bumper8.7 ft2.66 m
Length - With Blade On Ground26.8 ft8.17 m
Wheel Base12.1 ft3.69 m
Height - Top Of Hood100.8 in2560.33 mm
Centerline Of Rear Axle To Hitch73.2 in1859.28 mm
Height - Bottom Of Ladder2.3 ft0.71 m
Ground Clearance - Bumper2.9 ft0.89 m
Height - Top Of Cab12.1 ft3.69 m
Engine
Number Of Cylinders66
Engine Make22362236
Engine Model3176C ATAAC3176C ATAAC
Net Power339.3 hp253 kw
Power Measured @2000 rpm2000 rpm
Displacement891 cu in14.6 L
Bore5.4 in137.2 mm
Stroke6.5 in165.1 mm
Net Power - Iso 9249339 hp252.8 kw
Flywheel Power339 hp252.8 kw
Net Power - Eec 80/1269339 hp252.8 kw
Net Power - Din 70020327 PS327 PS
Net Power - Sae J1349 (Jan90)339 hp252.8 kw
Operational
Operating Weight63325.6 lb28724 kg
Fuel Capacity166.5 gal630 L
Tire Size29.5-5 16PR29.5-5 16PR
Transmission
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward20.6 mph33.1 km/h
Max Speed - Reverse22.8 mph36.6 km/h
Forward - 13.8 mph6.2 km/h
Forward - 26.5 mph10.5 km/h
Forward - 311.4 mph18.4 km/h
Forward - 420 mph32.2 km/h
Reverse - 14.3 mph7 km/h
Reverse - 27.5 mph12.1 km/h
Reverse - 313 mph21 km/h
Reverse - 422.7 mph36.6 km/h
Number Of Forward Speeds44
Number Of Reverse Speeds44
Steering
SteeringFull hydraulic, power steeringFull hydraulic, power steering
Turning Radius - With Straight Blade24 ft7.4 m
Weights
Operating Weight63325 lb28723.8 kg
Tires
Standard Tire Size29.5-25 L-329.5-25 L-3
Tires10 choices in addition to standard offering.10 choices in addition to standard offering.
Blade
Blade Capacity6.7 yd35.2 m3
Blade Width14.8 ft4510 mm
Blade Height4.1 ft1229 mm
Hydraulic System
Relief Valve Setting3500 psi3500 psi
Vane Pump Output At 2,000 Rpm And 6900 Kpa (1,000 Psi)24.5 gal/min24.5 gal/min
Lift Cylinder, Bore And Stroke120.65 mm x 915 mm 4.75 in x 36 in120.65 mm x 915 mm 4.75 in x 36 in
Steering Cylinder, Bore And Stroke114.3 mm x 576 mm 4.5 in x 22.7 in114.3 mm x 576 mm 4.5 in x 22.7 in
Right Tilt And Tip, Bore And Stroke152.4 mm x 255 mm 6 in x 10 in152.4 mm x 255 mm 6 in x 10 in
Left Tilt And Tip, Bore And Stroke133.35 mm x 255 mm 5.25 in x 10 in133.35 mm x 255 mm 5.25 in x 10 in
Axles
FrontPlanetary fixedPlanetary fixed
RearPlanetary oscillating 13 degreesPlanetary oscillating 13 degrees
Brakes
BrakesMeet OSHA, SAE J1473 DEC84, ISO 2450-1985 standards.Meet OSHA, SAE J1473 DEC84, ISO 2450-1985 standards.
Service Refill Capacities
Cooling System21.9 gal83 L
Crankcase9 gal34.1 L
Hydraulic Tank23.2 gal87.9 L
Fuel Tank - Standard166.5 gal630.3 L
Transmission16.4 gal62.1 L
Differential - Final Drives - Front23.8 gal90.1 L
Differential - Final Drives - Rear23.8 gal90.1 L
Cab
Rops/FopsMeets SAE and ISO standards.Meets SAE and ISO standards.
Sound Performance
StandardsMeet ANSI/SAE and ISO requirements.Meet ANSI/SAE and ISO requirements.
Blade Specifications
Straight Blade - Capacity6.2 yd34.7 m3
Blade Capacities4.67 m3 6.11 yd34.67 m3 6.11 yd3
Moldboard - Length13.8 ft4.2 m
Blade Tip Angle - Total22.4 degrees22.4 degrees
Blade Tip Angle - Forward11.2 degrees11.2 degrees
Blade Tip Angle - Back11.2 degrees11.2 degrees
Blade Tilt Angle - Right15.2 degrees15.2 degrees
Blade Tilt Angle - Left15.2 degrees15.2 degrees
Maximum Lift Above Ground3.5 ft1.1 m
Straight Blade - Overall Width14.8 ft4.6 m
Straight Blade - Height48.4 ft14.8 m
Straight Blade - Digging Depth17 ft5.2 m
Straight Blade - Ground Clearance37.6 ft11.5 m
Straight Blade - Maximum Tilt46.7 ft14.3 m
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.