Published dimensions and weight

Caterpillar 814F

The Caterpillar 814F is a wheel dozer of about 21.7 t, powered by a 240 hp engine.

01Published dimensions and weight

Dimensions reference

Representative category illustration for Wheel Dozer

Representative category illustration; exact model may differ.Measurement reference — not to scale

01Dimensions referenceLength × width × height

02Operating Weight47869 lb21713 kg

03Selected published values91

Published highlights

Length With Blade On Ground: 22.58 ft / 6881 mm
Width Over Tires: 9.19 ft / 2800 mm
Ground Clearance: 1.2 ft / 365.76 mm
Height To Top Of Cab: 10.92 ft / 3326 mm

Typical use

Wheel dozers are commonly used to push, spread and clean up material where wheeled mobility is useful. Published rows for Caterpillar 814F include published operating weight of 47869 lb / 21713 kg, published engine power of 254 hp / 189.5 kw, the published “Length With Blade On Ground” field of 22.58 ft / 6881 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Length With Blade On Ground” field (22.58 ft / 6881 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Width Over Tires” field (9.19 ft / 2800 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Ground Clearance” field (1.2 ft / 365.76 mm) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Dimensions

Length With Blade On Ground22.58 ft6881 mm

Width Over Tires9.19 ft2800 mm

Ground Clearance1.2 ft365.76 mm

Height To Top Of Cab10.92 ft3326 mm

Wheelbase11 ft3350 mm

Centerline Of Rear Axle To Edge Of Bumper6.14 ft1.88 m

Height - Top Of Hood93.48 in2374.4 mm

Length - With Blade On Ground22.58 ft6.89 m

Wheel Base11 ft3.36 m

Height - Top Of Exhaust Pipe130.09 in3304.04 mm

Centerline Of Rear Axle To Hitch66 in1676.4 mm

Height - Bottom Of Ladder1.45 ft0.45 m

Ground Clearance - Bumper2.46 ft0.75 m

Height - Top Of Cab10.91 ft3.33 m

Operating Specifications

Ground Clearance1.47 in0.04 m

Engine

Number Of Cylinders66

Engine Make22362236

Engine Model3176C ATAAC3176C ATAAC

Gross Power254 hp189.5 kw

Net Power240 hp179 kw

Power Measured @2100 rpm2100 rpm

Torque Rise45 %45 %

Displacement628.6 cu in10.3 L

Bore5 in125 mm

Stroke5.6 in140 mm

Net Power - Iso 9249240 hp179 kw

Flywheel Power240 hp179 kw

Net Power - Eec 80/1269240 hp179 kw

Net Power - Sae J1349 (Jan90)240 hp179 kw

Operational

Operating Weight47869 lb21713 kg

Fuel Capacity117.9 gal446 L

Cooling System Fluid Capacity14.6 gal55 L

Engine Oil Capacity9 gal34 L

Transmission Fluid Capacity13.3 gal50 L

Hydraulic System Fluid Capacity23.3 gal88 L

Front Diff Fluid Capacity17.2 gal65 L

Rear Diff Fluid Capacity17.2 gal65 L

Steering Angle30 degrees30 degrees

Axle Oscillation12 degrees12 degrees

Operating Voltage24 V24 V

Alternator Supplied Amperage70 amps70 amps

Tire Size23.5-25 12PR23.5-25 12PR

Transmission

Number Of Forward Gears44

Number Of Reverse Gears44

Max Speed - Forward19.3 mph30.9 km/h

Max Speed - Reverse21.9 mph35.1 km/h

Forward - 13.6 mph5.8 km/h

Forward - 26.3 mph10.2 km/h

Forward - 310.9 mph17.6 km/h

Forward - 419.2 mph30.9 km/h

Reverse - 14.1 mph6.6 km/h

Reverse - 27.1 mph11.5 km/h

Reverse - 312.5 mph20.2 km/h

Reverse - 421.8 mph35.1 km/h

Steering

Turning Radius - With Straight Blade15.6 ft4.8 m

Weights

Operating Weight47877 lb21716.7 kg

Tires

Standard Tire Size23.5-25,12PR23.5-25,12PR

Tires4 options available4 options available

Blade

Blade Capacity3.5 yd32.7 m3

Blade Width11.8 ft3596 mm

Blade Height3.7 ft1110 mm

Hydraulic System

Relief Valve Setting2255 psi2255 psi

Lift Cylinder, Bore And Stroke120.65 mm x 913.9 mm 4.74 in x 35.98 in120.65 mm x 913.9 mm 4.74 in x 35.98 in

Steering Cylinder, Bore And Stroke101.6 mm x 597 mm 3.99 in x 23.5 in101.6 mm x 597 mm 3.99 in x 23.5 in

Axles

FrontFixedFixed

RearOscillating 12 degreesOscillating 12 degrees

Maximum Single-Wheel Rise And Fall18.4 in467.2 mm

Brakes

BrakesMeet OSHA regulationsMeet OSHA regulations

Service Refill Capacities

Cooling System14.5 gal54.9 L

Crankcase9 gal34.1 L

Hydraulic Tank23.2 gal87.9 L

Fuel Tank - Standard117.8 gal446 L

Transmission13.2 gal50 L

Differential - Final Drives - Front17.1 gal64.8 L

Differential - Final Drives - Rear17.1 gal64.8 L

Cab

Rops/FopsMeets SAE and ISO standardsMeets SAE and ISO standards

Sound Performance

StandardsMeet required standardsMeet required standards

Blade Specifications

Straight Blade - Capacity3.5 yd32.7 m3

Blade Capacities2.66 m3 3.49 yd32.66 m3 3.49 yd3

Moldboard - Length11.8 ft3.6 m

Blade Tip Angle - Total51.9 degrees51.9 degrees

Blade Tip Angle - Forward10 degrees10 degrees

Blade Tip Angle - Back4.5 degrees4.5 degrees

Blade Tilt Angle - Right4.5 degrees4.5 degrees

Blade Tilt Angle - Left8 degrees8 degrees

Maximum Lift Above Ground2.4 ft0.8 m

Straight Blade - Overall Width11.8 ft3.6 m

Straight Blade - Height3.6 ft1.1 m

Straight Blade - Digging Depth1.8 ft0.6 m

Straight Blade - Ground Clearance2.4 ft0.8 m

Straight Blade - Maximum Tilt2.6 ft0.8 m

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View Caterpillar 814F listings Get a valuation for your Caterpillar 814F Post a want-to-buy request

Manufacturer-published specifications.

Caterpillar 814F

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other Caterpillar models