- Wheelbase: 67.91 in / 1724.66 mm
- Shipping Weight: 1105 kg
- Turning Radius Without Brakes: 9.03 ft / 2.75 m
- Number Of Cylinders: 3
Published dimensions and weight
John Deere 2032R
The John Deere 2032R is a utility tractor; its 3TNV88C-NJT engine is rated at 31.3 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Shipping Weight1105 kg1105 kg
03Selected published values56
Utility tractors are commonly used for property maintenance, loader work and operation of smaller agricultural implements. Published rows for John Deere 2032R include published engine power of 31.3 hp / 23.3 kw, the published “Wheelbase” field of 67.91 in / 1724.66 mm, the published “Shipping Weight” field of 1105 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Wheelbase” field (67.91 in / 1724.66 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Shipping Weight” field (1105 kg) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Turning Radius Without Brakes” field (9.03 ft / 2.75 m) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Wheelbase67.91 in1724.66 mm
Shipping Weight1105 kg1105 kg
Turning Radius Without Brakes9.03 ft2.75 m
Engine
Number Of Cylinders33
Rated Engine Speed2500 rpm2500 rpm
Engine Model3TNV88C-NJT3TNV88C-NJT
Engine ManufacturerYanmarYanmar
FamilyGYDXL1.64NDAGYDXL1.64NDA
Power Take-Off (Pto) Power24.2 hp24.2 hp
Engine TypeDirect InjectionDirect Injection
Injection Pump TypeDirect InjectionDirect Injection
Emissions ComplianceFinal Tier 4Final Tier 4
Cylinder LinersCast-In-BlockCast-In-Block
Compression Ratio19.1:119.1:1
Gross Power31.3 hp23.3 kw
LubricationPressurizedPressurized
Cooling SystemWater pumpWater pump
Air CleanerDual elementDual element
Engine Torque At Rated Speed86 Nm86 Nm
Displacement100.3 cu in1.7 L
AspirationNaturalNatural
Fuel Tank Capacity8.5 gal32 L
Bore3.5 in88 mm
Stroke3.6 in90 mm
Fluid Capacities
Crankcase With Filter4.5 L4.5 L
Electrical
Battery Size500 CCA500 CCA
Alternator (12-V)85 amp85 amp
Starter Size1.9 hp1.9 hp
Fuel System
Fuel System TypeDirect InjectionDirect Injection
Power Take-Off(Pto)
StandardRear - 540 rpm, Mid - 2000 rpmRear - 540 rpm, Mid - 2000 rpm
ControlIndependentIndependent
ClutchIndependentIndependent
Brake (For Mid And Rear Pto)Wet discWet disc
Transmission
Cruise ControlStandardStandard
Standard Transmission; Forward/ReverseHydrostatic transmission (HST)Hydrostatic transmission (HST)
BrakesWet discWet disc
SteeringPower steeringPower steering
Axle CapacityFront - 880 kg, Rear - 1089 kgFront - 880 kg, Rear - 1089 kg
CreeperNoNo
Differential LockYesYes
Final Drive TypeBull GearBull Gear
Tires
FrontR1 Ag 7.00-12, R3 Turf 23x8.50-14, R4 Industrial 23x8.50-14, R3 Turf Radial 200/60 R15R1 Ag 7.00-12, R3 Turf 23x8.50-14, R4 Industrial 23x8.50-14, R3 Turf Radial 200/60 R15
RearR1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20R1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20
Hydraulic
Maximum Operating Pressure2500 psi17236.9 kPa
Draft Control SensingPosition controlPosition control
Remote Control Valves AvailableUp to threeUp to three
Pump Rated OutputSteering - 15 L/min, Implement - 20.2 L/minSteering - 15 L/min, Implement - 20.2 L/min
Pump TypeGearGear
Hydraulic TypeOpen CenterOpen Center
Final Drive
Final Drive TypeSpur GearSpur Gear
Differential LockYesYes
3-Point Hitch
CategoryCategory 1Category 1
Lift Capacity, 24-In. Behind Link Arms615 kg615 kg
Operator Station
Rollover Protective StructureFoldable, ASABE S478Foldable, ASABE S478
Platform - Flat/StraddleFlatFlat
Gear Shift Location - Console/FloorLeft Hand SideLeft Hand Side
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.