- Wheelbase: 63 in / 1600 mm
- Front Axle Clearance: 12.45 in / 316 mm
- Limited Slip Differential: No
- Shipping Weight: 813.5 kg
Published dimensions and weight
John Deere 2025R
The John Deere 2025R is a utility tractor; its 3TNV80F-NCJT engine is rated at 23.9 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Shipping Weight813.5 kg813.5 kg
03Selected published values61
Utility tractors are commonly used for property maintenance, loader work and operation of smaller agricultural implements. Published rows for John Deere 2025R include published engine power of 23.9 hp / 17.8 kw, the published “Wheelbase” field of 63 in / 1600 mm, the published “Front Axle Clearance” field of 12.45 in / 316 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Wheelbase” field (63 in / 1600 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Front Axle Clearance” field (12.45 in / 316 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Limited Slip Differential” field (No) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Wheelbase63 in1600 mm
Front Axle Clearance12.45 in316 mm
Limited Slip DifferentialNoNo
Shipping Weight813.5 kg813.5 kg
Turning Radius Without Brakes8.7 ft2.65 m
Engine
Number Of Cylinders33
Rated Engine Speed3200 rpm3200 rpm
Engine Model3TNV80F-NCJT3TNV80F-NCJT
Engine ManufacturerYanmarYanmar
FamilyGYDXL1.27NS1, HYDXL1.27NS1GYDXL1.27NS1, HYDXL1.27NS1
Power Take-Off (Pto) Power18 hp18 hp
Engine TypeDieselDiesel
Injection Pump TypeIndirect InjectionIndirect Injection
Emissions ComplianceFinal Tier 4Final Tier 4
Cylinder LinersCast-In-BlockCast-In-Block
Compression Ratio23:0123:01
Gross Power23.9 hp17.8 kw
LubricationPressurizedPressurized
Cooling SystemWater pumpWater pump
Air CleanerDual elementDual element
Engine Torque At Rated Speed53 Nm53 Nm
Displacement77.4 cu in1.3 L
AspirationNaturalNatural
Fuel Tank Capacity6.3 gal23.8 L
Bore3.2 in80 mm
Stroke3.4 in84 mm
Fluid Capacities
Crankcase With Filter2.7 L2.7 L
Electrical
Battery Size500 CCA500 CCA
Alternator (12-V)40 amp40 amp
Starter Size1.6 hp1.6 hp
Fuel System
Fuel System TypeIndirect InjectionIndirect Injection
Fuel Consumption1.5 gal/hr1.5 gal/hr
Power Take-Off(Pto)
StandardRear - 540 rpm, Mid - 2100 rpmRear - 540 rpm, Mid - 2100 rpm
ControlIndependentIndependent
ClutchWet discWet disc
Brake (For Mid And Rear Pto)Wet discWet disc
Transmission
Cruise ControlStandardStandard
Standard Transmission; Forward/ReverseHydrostatic - 2 rangeHydrostatic - 2 range
Left-Hand ReverserNoNo
BrakesWet discWet disc
SteeringPower steeringPower steering
Axle CapacityFront - 612 kg, Rear - 1100 kgFront - 612 kg, Rear - 1100 kg
CreeperNoNo
Differential LockYesYes
Final Drive TypeSpur GearSpur Gear
Tires
Front Tread Range95.3 cm95.3 cm
FrontR3 Turf - 23x8.50-12, R4 Industrial - 23x8.50-12, R3 Radial - 220/55-R12R3 Turf - 23x8.50-12, R4 Industrial - 23x8.50-12, R3 Radial - 220/55-R12
RearR3 Turf - 31x13.5-15, R4 Industrial - 12-16.5, R3 Radial - 280/70-R16R3 Turf - 31x13.5-15, R4 Industrial - 12-16.5, R3 Radial - 280/70-R16
Hydraulic
Maximum Operating Pressure2150 psi14823.8 kPa
Draft Control SensingPosition controlPosition control
Remote Control Valves Available22
Pump Rated OutputSteering 13.25 L/min 3.5 gpm, Implement 13.25 L/min, 3.5 gpm, 26.5 L/min , 7.0 gpmSteering 13.25 L/min 3.5 gpm, Implement 13.25 L/min, 3.5 gpm, 26.5 L/min , 7.0 gpm
Pump TypeGearGear
Hydraulic TypeOpen CenterOpen Center
Final Drive
Final Drive TypeSpur GearSpur Gear
Differential LockYesYes
3-Point Hitch
CategoryLimited Category 1Limited Category 1
Lift Capacity, 24-In. Behind Link Arms400 kg400 kg
Operator Station
Rollover Protective StructureType Foldable OSHA, SAE, ASAEType Foldable OSHA, SAE, ASAE
Platform - Flat/StraddleThree-piece semi flatThree-piece semi flat
Gear Shift Location - Console/FloorLeft Hand SideLeft Hand Side
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.