- Wheelbase: 57.1 in / 1450.34 mm
- Front Axle Clearance: 7.68 in / 195 mm
- Limited Slip Differential: No
- Shipping Weight: 655 kg
Published dimensions and weight
John Deere 1025R
The John Deere 1025R is a utility tractor built around the 3TNV80F-NCJT engine (23.9 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Shipping Weight655 kg655 kg
03Selected published values62
Utility tractors are commonly used for property maintenance, loader work and operation of smaller agricultural implements. Published rows for John Deere 1025R include published engine power of 23.9 hp / 17.8 kw, the published “Wheelbase” field of 57.1 in / 1450.34 mm, the published “Front Axle Clearance” field of 7.68 in / 195 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Wheelbase” field (57.1 in / 1450.34 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Front Axle Clearance” field (7.68 in / 195 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Limited Slip Differential” field (No) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Wheelbase57.1 in1450.34 mm
Front Axle Clearance7.68 in195 mm
Limited Slip DifferentialNoNo
Shipping Weight655 kg655 kg
Turning Radius Without Brakes7.39 ft2.25 m
Engine
Number Of Cylinders33
Rated Engine Speed3200 rpm3200 rpm
Engine Model3TNV80F-NCJT3TNV80F-NCJT
Engine ManufacturerYanmarYanmar
FamilyEYDXL1.27NS1, FYDXL1.27NS1, GYDXL1.27NS1EYDXL1.27NS1, FYDXL1.27NS1, GYDXL1.27NS1
Power Take-Off (Pto) Power18 hp18 hp
Engine TypeDieselDiesel
Injection Pump TypeIndirect InjectionIndirect Injection
Emissions ComplianceFinal Tier 4Final Tier 4
Cylinder LinersCast-In-BlockCast-In-Block
Compression Ratio23.0:123.0:1
Gross Power23.9 hp17.8 kw
LubricationPressurizedPressurized
Cooling SystemWater pumpWater pump
Air CleanerDual element with mechanical restriction indicatorDual element with mechanical restriction indicator
Engine Torque At Rated Speed55.2 Nm55.2 Nm
Displacement77.4 cu in1.3 L
AspirationNaturalNatural
Fuel Tank Capacity5.7 gal21.2 L
Bore3.2 in80 mm
Stroke3.4 in84 mm
Fluid Capacities
Crankcase With Filter2.7 L2.7 L
Transmission And Hydraulic System14 L14 L
Electrical
Battery Size500 CCA500 CCA
Alternator (12-V)40 amp40 amp
Starter Size1.6 hp1.6 hp
Fuel System
Fuel System TypeIndirect InjectionIndirect Injection
Fuel Consumption1.5 gal/hr1.5 gal/hr
Power Take-Off(Pto)
StandardRear - 540 rpm, Mid - 2100 rpmRear - 540 rpm, Mid - 2100 rpm
ControlIndependentIndependent
ClutchWet discWet disc
Brake (For Mid And Rear Pto)Wet discWet disc
Transmission
Cruise ControlStandardStandard
Standard Transmission; Forward/ReverseHydrostatic - 2 rangeHydrostatic - 2 range
Left-Hand ReverserNoNo
BrakesWet disc (left-hand pedal)Wet disc (left-hand pedal)
SteeringPowerPower
Axle CapacityFront - 612 kg, Rear - 715 kgFront - 612 kg, Rear - 715 kg
CreeperNoNo
Differential LockYesYes
Final Drive TypeBull GearBull Gear
Tires
Front Tread Range91.8 cm91.8 cm
FrontR4 - 18x8.5-10R4 - 18x8.5-10
RearR4 - 26x12-12R4 - 26x12-12
Hydraulic
Maximum Operating Pressure2000 psi13789.6 kPa
Draft Control SensingPosition controlPosition control
Remote Control Valves Available22
Pump Rated OutputSteering - 10.8 L/min, Implement - 13.2 L/minSteering - 10.8 L/min, Implement - 13.2 L/min
Pump TypeGearGear
Hydraulic TypeOpen CenterOpen Center
Final Drive
Final Drive TypeBull GearBull Gear
Differential LockYesYes
3-Point Hitch
CategoryLimited Category 1Limited Category 1
Lift Capacity, 24-In. Behind Link Arms309 kg309 kg
Operator Station
Rollover Protective StructureFoldableFoldable
Platform - Flat/StraddleOne-piece semi flatOne-piece semi flat
Gear Shift Location - Console/FloorLeft Hand SideLeft Hand Side
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.