- Overall Length: 31.75 ft / 9730 mm
- Width Over Tires: 9.08 ft / 2800 mm
- Wheelbase: 21.75 ft / 6681 mm
- Blade Base: 9.5 ft / 2935 mm
Published dimensions and weight
Volvo G990
The Volvo G990 is a motor grader powered by a 277 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total48720 lb22100 kg
03Selected published values59
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G990 include published moldboard width of 14 ft / 4267.2 mm, published maximum power of 277 hp / 206.6 kw, published operating weight of 48720 lb / 22100 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (31.75 ft / 9730 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (9.08 ft / 2800 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (21.75 ft / 6681 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length31.75 ft9730 mm
Width Over Tires9.08 ft2800 mm
Wheelbase21.75 ft6681 mm
Blade Base9.5 ft2935 mm
Height To Top Of Isomount Cab10.58 ft3280 mm
Engine
Number Of Cylinders66
Engine Make22442244
Engine ModelD9BD9B
Power Measured @1700 rpm1700 rpm
Torque Measured @1550 rpm1550 rpm
Max Power277 hp206.6 kw
Net Power Gears 7-8277 hp206.6 kw
Net Torque Gears 7-8929 lb ft1260 Nm
Displacement573 cu in9.4 L
AspirationTurbocharged, AftercooledTurbocharged, Aftercooled
Operational
Std Operation Weight - Front Axle13670 lb6200 kg
Hydraulic System Fluid Capacity24 gal91 L
Std Operation Weight - Rear Axle35050 lb15900 kg
Std Operation Weight - Total48720 lb22100 kg
Max Operation Weight - Front Axle18500 lb8390 kg
Max Operation Weight - Rear Axle42000 lb19050 kg
Max Operation Weight - Total60000 lb27200 kg
Oil System Fluid Capacity10.4 gal39 L
Fuel Capacity132 gal498 L
Cooling System Fluid Capacity12.4 gal47 L
Transmission Fluid Capacity16 gal61 L
Tandem Case Fluid Capacity (Each)27.7 gal105 L
Tire Size16:00 x 24, G-216:00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle21 degrees21 degrees
Turning Radius26.8 ft8150 m
Transmission
Transmission TypeHTE 840, Fully sequential, direct drive, Volvo powershift transmissionHTE 840, Fully sequential, direct drive, Volvo powershift transmission
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward28.1 mph44.9 km/h
Max Speed - Reverse19.8 mph31.6 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance24.2 in615 mm
Moldboard
Moldboard Width14 ft4267.2 mm
Moldboard Height31 in787 mm
Moldboard Thickness1 in25 mm
Max Depth Of Cut32.5 in825 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Blade Pull At Max Weight37800 lb17145 kg
Blade Down Pressure24457 lb11058 kg
Hydraulic System
Pump TypeAxial piston pumpAxial piston pump
Pump Flow55 gal/min208 L/min
Relief Valve Pressure3000 psi20684.3 kPa
Circle
Diameter64 in1626 mm
Rotation360 degrees360 degrees
Shift Left30 in762 mm
Shift Right29.5 in749 mm
Max Reach Outside Tires - Left89 in2260 mm
Max Reach Outside Tires - Right89 in2260 mm
Blade Tip Angle - Front46 degrees46 degrees
Blade Tip Angle - Rear13 degrees13 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.