- Overall Length: 29.84 ft / 9093 mm
- Width Over Tires: 8.17 ft / 2489 mm
- Wheelbase: 20 ft / 6096 mm
- Blade Base: 8.59 ft / 2616 mm
Published dimensions and weight
Volvo G710B
The Volvo G710B is a motor grader powered by a 173 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total33400.1 lb15150 kg
03Selected published values55
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G710B include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 173 hp / 129.1 kw, published operating weight of 33400.1 lb / 15150 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (29.84 ft / 9093 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.17 ft / 2489 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20 ft / 6096 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length29.84 ft9093 mm
Width Over Tires8.17 ft2489 mm
Wheelbase20 ft6096 mm
Blade Base8.59 ft2616 mm
Height To Top Of Isomount Cab10.09 ft3073 mm
Engine
Engine Make22442244
Engine ModelD7DGAE2D7DGAE2
Power Measured @2200 rpm2200 rpm
Torque Measured @1400 rpm1400 rpm
Max Power173 hp129.1 kw
Net Power Gears 7-8173 hp129.1 kw
Net Torque Gears 7-8591 lb ft801.3 Nm
Displacement436 cu in7.2 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle9687.2 lb4394 kg
Hydraulic System Fluid Capacity35.4 gal134 L
Std Operation Weight - Rear Axle23715.2 lb10757 kg
Std Operation Weight - Total33400.1 lb15150 kg
Fuel Capacity100 gal378.5 L
Cooling System Fluid Capacity12.5 gal47 L
Transmission Fluid Capacity10.1 gal38 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size13.00 x 24, G-213.00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Steering
Articulation Angle22 degrees22 degrees
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward24.9 mph40.1 km/h
Max Speed - Reverse17.8 mph28.7 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2 ft597 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22.3 mm
Max Depth Of Cut32 in812.8 mm
Side Shift Left26.5 in673.1 mm
Side Shift Right26.5 in673.1 mm
Blade Pull At Max Weight20157 lb9143.1 kg
Blade Down Pressure16968 lb7696.6 kg
Hydraulic System
Pump Typeload sensing hydraulicload sensing hydraulic
Pump Flow75.1 gal/min284 L/min
Relief Valve Pressure2700 psi18615.9 kPa
Circle
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left30.5 in774.7 mm
Shift Right29.5 in749.3 mm
Max Reach Outside Tires - Left79.5 in2019.3 mm
Max Reach Outside Tires - Right80.5 in2044.7 mm
Max Lift Above Ground17 in431.8 mm
Blade Tip Angle - Front47 degrees47 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.