- Overall Length: 27.84 ft / 8484 mm
- Width Over Tires: 8.34 ft / 2540 mm
- Wheelbase: 20 ft / 6096 mm
- Blade Base: 8.51 ft / 2591 mm
Published dimensions and weight
Volvo G730
The Volvo G730 is a motor grader powered by a 205 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total34751.5 lb15763 kg
03Selected published values53
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G730 include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 205 hp / 152.9 kw, published operating weight of 34751.5 lb / 15763 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.84 ft / 8484 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.34 ft / 2540 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20 ft / 6096 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.84 ft8484 mm
Width Over Tires8.34 ft2540 mm
Wheelbase20 ft6096 mm
Blade Base8.51 ft2591 mm
Height To Top Of Isomount Cab10.17 ft3099 mm
Engine
Engine Make23472347
Engine Model6C8.36C8.3
Max Power205 hp152.9 kw
Net Power Gears 7-8205 hp152.9 kw
Net Torque Gears 7-8636 lb ft862.4 Nm
Displacement504.5 cu in8.3 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle10595.5 lb4806 kg
Hydraulic System Fluid Capacity23.8 gal90 L
Std Operation Weight - Rear Axle24156.1 lb10957 kg
Std Operation Weight - Total34751.5 lb15763 kg
Fuel Capacity100 gal378.5 L
Cooling System Fluid Capacity12.5 gal47 L
Transmission Fluid Capacity10.1 gal38 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size14.00 x 24, G-214.00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Steering
Articulation Angle22 degrees22 degrees
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward28.5 mph45.9 km/h
Max Speed - Reverse20.4 mph32.9 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2.1 ft610 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22.3 mm
Max Depth Of Cut32 in812.8 mm
Side Shift Left26.5 in673.1 mm
Side Shift Right26.5 in673.1 mm
Blade Pull At Max Weight21736 lb9859.3 kg
Blade Down Pressure18426 lb8357.9 kg
Hydraulic System
Pump Typeload sensing hydraulicload sensing hydraulic
Pump Flow50.5 gal/min191 L/min
Relief Valve Pressure2500 psi17236.9 kPa
Circle
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left30.5 in774.7 mm
Shift Right29.5 in749.3 mm
Max Reach Outside Tires - Left79.5 in2019.3 mm
Max Reach Outside Tires - Right79 in2006.6 mm
Max Lift Above Ground17.5 in444.5 mm
Blade Tip Angle - Front44 degrees44 degrees
Blade Tip Angle - Rear6.5 degrees6.5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.