- Overall Length: 29.92 ft / 9119 mm
- Width Over Tires: 8.34 ft / 2540 mm
- Wheelbase: 20 ft / 6096 mm
- Blade Base: 8.51 ft / 2591 mm
Published dimensions and weight
Volvo G730B
The Volvo G730B is a motor grader; its D7DGCE2 engine is rated at 228 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total35501.1 lb16103 kg
03Selected published values56
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G730B include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 228 hp / 170.1 kw, published operating weight of 35501.1 lb / 16103 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (29.92 ft / 9119 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.34 ft / 2540 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20 ft / 6096 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length29.92 ft9119 mm
Width Over Tires8.34 ft2540 mm
Wheelbase20 ft6096 mm
Blade Base8.51 ft2591 mm
Height To Top Of Isomount Cab10.17 ft3099 mm
Engine
Number Of Cylinders66
Engine Make22442244
Engine ModelD7DGCE2D7DGCE2
Power Measured @2200 rpm2200 rpm
Torque Measured @1400 rpm1400 rpm
Max Power228 hp170.1 kw
Net Power Gears 7-8228 hp170.1 kw
Net Torque Gears 7-8774 lb ft1049.5 Nm
Displacement436 cu in7.2 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle10295.6 lb4670 kg
Std Operation Weight - Rear Axle25205.5 lb11433 kg
Hydraulic System Fluid Capacity35.4 gal134 L
Std Operation Weight - Total35501.1 lb16103 kg
Fuel Capacity100 gal378.5 L
Cooling System Fluid Capacity7.4 gal28 L
Transmission Fluid Capacity10.1 gal38 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size14.00 x 24, G-214.00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle22 degrees22 degrees
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward28.5 mph45.9 km/h
Max Speed - Reverse20.4 mph32.9 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2.1 ft610 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22.3 mm
Max Depth Of Cut32 in812.8 mm
Side Shift Left26.5 in673.1 mm
Side Shift Right26.5 in673.1 mm
Blade Pull At Max Weight22685 lb10289.8 kg
Blade Down Pressure17904 lb8121.2 kg
Hydraulic System
Pump Typeload sensing hydraulicload sensing hydraulic
Pump Flow75.1 gal/min284 L/min
Relief Valve Pressure2700 psi18615.9 kPa
Circle
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left30.5 in774.7 mm
Shift Right29.5 in749.3 mm
Max Reach Outside Tires - Left79.5 in2019.3 mm
Max Reach Outside Tires - Right79 in2006.6 mm
Max Lift Above Ground17.5 in444.5 mm
Blade Tip Angle - Front44 degrees44 degrees
Blade Tip Angle - Rear6.5 degrees6.5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.