- Overall Length: 31.08 ft / 9500 mm
- Width Over Tires: 9.08 ft / 2780 mm
- Wheelbase: 21.33 ft / 6531 mm
- Blade Base: 9.08 ft / 2790 mm
Published dimensions and weight
Volvo G976
The Volvo G976 is a motor grader powered by a 262 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total43650 lb19800 kg
03Selected published values59
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G976 include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 262 hp / 195.4 kw, published operating weight of 43650 lb / 19800 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (31.08 ft / 9500 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (9.08 ft / 2780 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (21.33 ft / 6531 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length31.08 ft9500 mm
Width Over Tires9.08 ft2780 mm
Wheelbase21.33 ft6531 mm
Blade Base9.08 ft2790 mm
Height To Top Of Isomount Cab10.42 ft3225 mm
Engine
Number Of Cylinders66
Engine Make22442244
Engine ModelD9BD9B
Power Measured @1700 rpm1700 rpm
Torque Measured @1550 rpm1550 rpm
Max Power262 hp195.4 kw
Net Power Gears 7-8262 hp195.4 kw
Net Torque Gears 7-8876 lb ft1188 Nm
Displacement573 cu in9.4 L
AspirationTurbocharged, AftercooledTurbocharged, Aftercooled
Operational
Std Operation Weight - Front Axle12340 lb5600 kg
Hydraulic System Fluid Capacity38 gal144 L
Std Operation Weight - Rear Axle31310 lb14200 kg
Std Operation Weight - Total43650 lb19800 kg
Max Operation Weight - Front Axle18500 lb8390 kg
Max Operation Weight - Rear Axle35000 lb15880 kg
Max Operation Weight - Total51500 lb23360 kg
Oil System Fluid Capacity10.4 gal39 L
Fuel Capacity132 gal498 L
Cooling System Fluid Capacity12.4 gal47 L
Transmission Fluid Capacity16 gal61 L
Tandem Case Fluid Capacity (Each)26.4 gal100 L
Tire Size14:00 x 24, G-214:00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle21 degrees21 degrees
Turning Radius25.1 ft7640 m
Transmission
Transmission TypeHTE 840, Fully sequential, direct drive, Volvo powershift transmissionHTE 840, Fully sequential, direct drive, Volvo powershift transmission
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward27.4 mph43.8 km/h
Max Speed - Reverse19.3 mph30.1 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance23.2 in590 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height29.1 in737 mm
Moldboard Thickness1 in25 mm
Max Depth Of Cut30.5 in775 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Blade Pull At Max Weight40000 lb18147 kg
Blade Down Pressure21574 lb9776 kg
Hydraulic System
Pump TypeAxial piston pumpAxial piston pump
Pump Flow55 gal/min208 L/min
Relief Valve Pressure3000 psi20684.3 kPa
Circle
Diameter64 in1626 mm
Rotation360 degrees360 degrees
Shift Left30.5 in775 mm
Shift Right29.5 in749 mm
Max Reach Outside Tires - Left78 in1970 mm
Max Reach Outside Tires - Right77 in1960 mm
Blade Tip Angle - Front45 degrees45 degrees
Blade Tip Angle - Rear6 degrees6 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.