- Overall Length: 30 ft / 9150 mm
- Width Over Tires: 8.25 ft / 2537 mm
- Wheelbase: 20.43 ft / 6280 mm
- Front Ground Clearance: 2 ft / 610 mm
Published dimensions and weight
Volvo G946B
The Volvo G946B is a motor grader built around the D8HGAE4 engine (146 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total38514.8 lb17470 kg
03Selected published values59
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G946B include published moldboard width of 12.1 ft / 3658 mm, published operating weight of 38514.8 lb / 17470 kg, the published “Overall Length” field of 30 ft / 9150 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30 ft / 9150 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.25 ft / 2537 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.43 ft / 6280 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length30 ft9150 mm
Width Over Tires8.25 ft2537 mm
Wheelbase20.43 ft6280 mm
Front Ground Clearance2 ft610 mm
Blade Base8.5 ft2650 mm
Height To Top Of Isomount Cab10.42 ft3225 mm
Engine
Number Of Cylinders66
Engine ModelD8HGAE4D8HGAE4
Net Power Gear 1-2146 hp108.9 kw
Net Torque Gears 1-2730.2 lb ft990 Nm
Displacement476 cu in7.8 L
Bore4.4 in110 mm
Stroke5.4 in136 mm
AspirationTurbocharged, AftercooledTurbocharged, Aftercooled
Operational
Std Operation Weight - Front Axle10780.7 lb4890 kg
Hydraulic System Fluid Capacity38 gal144 L
Std Operation Weight - Rear Axle27734.2 lb12580 kg
Std Operation Weight - Total38514.8 lb17470 kg
Max Operation Weight - Front Axle16700.1 lb7575 kg
Max Operation Weight - Rear Axle31400.5 lb14243 kg
Max Operation Weight - Total47999.1 lb21772 kg
Oil System Fluid Capacity5.7 gal21.5 L
Fuel Capacity105.7 gal400 L
Cooling System Fluid Capacity9 gal34 L
Transmission Fluid Capacity16 gal61 L
Rear Diff/Final Drive Fluid Capacity6 gal22.7 L
Tandem Case Fluid Capacity (Each)35.4 gal134 L
Tire Size14:00 x 24, G-214:00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage120 amps120 amps
Steering
Articulation Angle23 degrees23 degrees
Turning Radius23835.4 ft7265 m
Transmission
Transmission TypeFully sequential, direct drive, Volvo powershift transmissionFully sequential, direct drive, Volvo powershift transmission
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward27.3 mph43.8 km/h
Max Speed - Reverse19.3 mph30.9 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2 ft610 mm
Moldboard
Moldboard Width12.1 ft3658 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut31 in790 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Blade Pull At Max Weight36759.9 lb16674 kg
Blade Down Pressure18651.2 lb8460 kg
Hydraulic System
Pump TypeAxial piston pumpAxial piston pump
Pump Flow55 gal/min208 L/min
Relief Valve Pressure3002.3 psi20700 kPa
Circle
Diameter64 in1626 mm
Rotation360 degrees360 degrees
Shift Left30.5 in775 mm
Shift Right29.5 in749 mm
Max Reach Outside Tires - Left80 in2020 mm
Max Reach Outside Tires - Right79 in2010 mm
Blade Tip Angle - Front45 degrees45 degrees
Blade Tip Angle - Rear6 degrees6 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.