- Overall Length: 30 ft / 9150 mm
- Width Over Tires: 8.25 ft / 2537 mm
- Wheelbase: 20.43 ft / 6280 mm
- Front Ground Clearance: 2 ft / 610 mm
Published dimensions and weight
Volvo G946
The Volvo G946 is a motor grader built around the D7E engine (225 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total38140 lb17300 kg
03Selected published values60
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G946 include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 225 hp / 167.8 kw, published operating weight of 38140 lb / 17300 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30 ft / 9150 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.25 ft / 2537 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.43 ft / 6280 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length30 ft9150 mm
Width Over Tires8.25 ft2537 mm
Wheelbase20.43 ft6280 mm
Front Ground Clearance2 ft610 mm
Blade Base8.5 ft2650 mm
Height To Top Of Isomount Cab10.42 ft3225 mm
Engine
Number Of Cylinders66
Engine Make22442244
Engine ModelD7ED7E
Power Measured @1800 rpm1800 rpm
Torque Measured @1500 rpm1500 rpm
Max Power225 hp167.8 kw
Net Power Gears 7-8225 hp167.8 kw
Net Torque Gears 7-8754 lb ft1023 Nm
Displacement436 cu in7.2 L
AspirationTurbocharged, AftercooledTurbocharged, Aftercooled
Operational
Std Operation Weight - Front Axle11020 lb5000 kg
Hydraulic System Fluid Capacity38 gal144 L
Std Operation Weight - Rear Axle27120 lb12300 kg
Std Operation Weight - Total38140 lb17300 kg
Max Operation Weight - Front Axle16700 lb7570 kg
Max Operation Weight - Rear Axle31400 lb14240 kg
Max Operation Weight - Total48000 lb21770 kg
Oil System Fluid Capacity5.7 gal21.5 L
Fuel Capacity107 gal404 L
Cooling System Fluid Capacity9 gal34 L
Transmission Fluid Capacity16 gal61 L
Tandem Case Fluid Capacity (Each)26.4 gal100 L
Tire Size14:00 x 24, G-214:00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle23 degrees23 degrees
Turning Radius23.9 ft7265 m
Transmission
Transmission TypeHTE 840, Fully sequential, direct drive, Volvo powershift transmissionHTE 840, Fully sequential, direct drive, Volvo powershift transmission
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward28.4 mph45.4 km/h
Max Speed - Reverse20 mph32 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2 ft610 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut31 in790 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Blade Pull At Max Weight36760 lb16671 kg
Blade Down Pressure19035 lb8650 kg
Hydraulic System
Pump TypeAxial piston pumpAxial piston pump
Pump Flow55 gal/min208 L/min
Relief Valve Pressure3000 psi20684.3 kPa
Circle
Diameter64 in1626 mm
Rotation360 degrees360 degrees
Shift Left30.5 in775 mm
Shift Right29.5 in749 mm
Max Reach Outside Tires - Left80 in2020 mm
Max Reach Outside Tires - Right79 in2010 mm
Blade Tip Angle - Front45 degrees45 degrees
Blade Tip Angle - Rear6 degrees6 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.