- Overall Length: 29.25 ft / 8930 mm
- Width Over Tires: 8.25 ft / 2537 mm
- Wheelbase: 20.43 ft / 6280 mm
- Front Ground Clearance: 2 ft / 610 mm
Published dimensions and weight
Volvo G930
The Volvo G930 is a motor grader; its D7EGCE3 engine is rated at 204 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total34830 lb15800 kg
03Selected published values61
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G930 include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 204 hp / 152.2 kw, published operating weight of 34830 lb / 15800 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (29.25 ft / 8930 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.25 ft / 2537 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.43 ft / 6280 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length29.25 ft8930 mm
Width Over Tires8.25 ft2537 mm
Wheelbase20.43 ft6280 mm
Front Ground Clearance2 ft610 mm
Blade Base8.58 ft2675 mm
Height To Top Of Isomount Cab10.42 ft3225 mm
Engine
Number Of Cylinders66
Engine Make22442244
Engine ModelD7EGCE3D7EGCE3
Power Measured @1800 rpm1800 rpm
Torque Measured @1550 rpm1550 rpm
Max Power204 hp152.2 kw
Net Power Gears 7-8204 hp152.2 kw
Net Torque Gears 7-8684 lb ft928 Nm
Displacement436 cu in7.2 L
AspirationTurbocharged, AftercooledTurbocharged, Aftercooled
Operational
Std Operation Weight - Front Axle10360 lb4700 kg
Hydraulic System Fluid Capacity24 gal91 L
Std Operation Weight - Rear Axle24470 lb11100 kg
Std Operation Weight - Total34830 lb15800 kg
Max Operation Weight - Front Axle16700 lb7570 kg
Max Operation Weight - Rear Axle31400 lb14240 kg
Max Operation Weight - Total42500 lb19280 kg
Oil System Fluid Capacity5.7 gal21.5 L
Fuel Capacity92 gal348 L
Cooling System Fluid Capacity8.2 gal31 L
Transmission Fluid Capacity16 gal61 L
Tandem Case Fluid Capacity (Each)26.4 gal100 L
Tire Size14:00 x 24, G-214:00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle50 degrees50 degrees
Turning Radius23.9 ft7265 m
Transmission
Transmission TypeHTE 840, Fully sequential, direct drive, volvo powershift transmissionHTE 840, Fully sequential, direct drive, volvo powershift transmission
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward28.4 mph45.4 km/h
Max Speed - Reverse20 mph32 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2 ft610 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut31 in790 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Blade Pull At Max Weight28260 lb12816 kg
Blade Down Pressure18021 lb8188 kg
Hydraulic System
Pump TypeAxial piston pumpAxial piston pump
Pump Flow55 gal/min208 L/min
Relief Valve Pressure3000 psi207 kPa
Circle
Diameter64 in1626 mm
Rotation360 degrees360 degrees
Shift Left30.5 in775 mm
Shift Right29.5 in749 mm
Max Reach Outside Tires - Left80 in2020 mm
Max Reach Outside Tires - Right79 in2010 mm
Max Lift Above Ground19.4 in492 mm
Blade Tip Angle - Front47 degrees47 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.