- Overall Length: 30.25 ft / 9220 mm
- Width Over Tires: 8.34 ft / 2540 mm
- Wheelbase: 8.92 ft / 2718 mm
- Blade Base: 8.92 ft / 2718 mm
Published dimensions and weight
Volvo G746B
Rated at 243 hp, the Volvo G746B is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total38250.2 lb17350 kg
03Selected published values55
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G746B include published moldboard width of 12 ft / 3657.6 mm, published maximum power of 243 hp / 181.3 kw, published operating weight of 38250.2 lb / 17350 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (30.25 ft / 9220 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.34 ft / 2540 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (8.92 ft / 2718 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length30.25 ft9220 mm
Width Over Tires8.34 ft2540 mm
Wheelbase8.92 ft2718 mm
Blade Base8.92 ft2718 mm
Height To Top Of Isomount Cab10.17 ft3099 mm
Engine
Engine Make22442244
Engine ModelD10BGAE2D10BGAE2
Power Measured @2100 rpm2100 rpm
Torque Measured @1100 rpm1100 rpm
Max Power243 hp181.3 kw
Net Power Gears 7-8243 hp181.3 kw
Net Torque Gears 7-8846 lb ft1147.1 Nm
Displacement586 cu in9.7 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle11475.1 lb5205 kg
Hydraulic System Fluid Capacity35.4 gal134 L
Std Operation Weight - Rear Axle26775.2 lb12145 kg
Std Operation Weight - Total38250.2 lb17350 kg
Fuel Capacity120 gal454 L
Cooling System Fluid Capacity8.2 gal31 L
Transmission Fluid Capacity10.1 gal38 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size14.00 x 24, G-214.00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage80 amps80 amps
Steering
Articulation Angle22 degrees22 degrees
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward27.2 mph43.8 km/h
Max Speed - Reverse19.5 mph31.4 km/h
Front Axle
Wheel Lean15 degrees15 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2.1 ft610 mm
Moldboard
Moldboard Width12 ft3657.6 mm
Moldboard Height29 in736.6 mm
Moldboard Thickness1 in25.4 mm
Max Depth Of Cut32 in812.8 mm
Side Shift Left26.5 in673.1 mm
Side Shift Right26.5 in673.1 mm
Blade Pull At Max Weight24098 lb10930.7 kg
Blade Down Pressure20308 lb9211.6 kg
Hydraulic System
Pump Typeload sensing hydraulicload sensing hydraulic
Pump Flow75.1 gal/min284 L/min
Relief Valve Pressure2700 psi18615.9 kPa
Circle
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left30.5 in774.7 mm
Shift Right29.5 in749.3 mm
Max Reach Outside Tires - Left79.5 in2019.3 mm
Max Reach Outside Tires - Right79 in2006.6 mm
Max Lift Above Ground17.5 in444.5 mm
Blade Tip Angle - Front44 degrees44 degrees
Blade Tip Angle - Rear6.5 degrees6.5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.