- Overall Length: 28.34 ft / 8636 mm
- Width Over Tires: 8.34 ft / 2540 mm
- Wheelbase: 20.5 ft / 6248 mm
- Blade Base: 8.92 ft / 2718 mm
Published dimensions and weight
Volvo G740
The Volvo G740 is a motor grader built around the M11 engine (210 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total35611.3 lb16153 kg
03Selected published values55
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Volvo G740 include published moldboard width of 15 ft / 4572 mm, published maximum power of 210 hp / 156.6 kw, published operating weight of 35611.3 lb / 16153 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.34 ft / 8636 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.34 ft / 2540 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.5 ft / 6248 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.34 ft8636 mm
Width Over Tires8.34 ft2540 mm
Wheelbase20.5 ft6248 mm
Blade Base8.92 ft2718 mm
Height To Top Of Isomount Cab10.17 ft3099 mm
Engine
Engine Make23472347
Engine ModelM11M11
Power Measured @2100 rpm2100 rpm
Torque Measured @1300 rpm1300 rpm
Max Power210 hp156.6 kw
Net Power Gears 7-8210 hp156.6 kw
Net Torque Gears 7-8760 lb ft1030.5 Nm
Displacement659.1 cu in10.8 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle10694.7 lb4851 kg
Hydraulic System Fluid Capacity23.8 gal90 L
Std Operation Weight - Rear Axle24916.7 lb11302 kg
Std Operation Weight - Total35611.3 lb16153 kg
Fuel Capacity100 gal378.5 L
Cooling System Fluid Capacity13.3 gal50 L
Transmission Fluid Capacity10.1 gal38 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size14.00 x 24, G-214.00 x 24, G-2
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Steering
Articulation Angle22 degrees22 degrees
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward27.2 mph43.8 km/h
Max Speed - Reverse19.5 mph31.4 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2.1 ft610 mm
Moldboard
Moldboard Width15 ft4572 mm
Moldboard Height29 in736.6 mm
Moldboard Thickness1 in25.4 mm
Max Depth Of Cut31.5 in800.1 mm
Side Shift Left26.5 in673.1 mm
Side Shift Right26.5 in673.1 mm
Blade Pull At Max Weight22424 lb10171.4 kg
Blade Down Pressure18904 lb8574.8 kg
Hydraulic System
Pump Typeload sensing hydraulicload sensing hydraulic
Pump Flow48.4 gal/min183 L/min
Relief Valve Pressure2500 psi17236.9 kPa
Circle
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left30.5 in774.7 mm
Shift Right29.5 in749.3 mm
Max Reach Outside Tires - Left79.5 in2019.3 mm
Max Reach Outside Tires - Right79 in2006.6 mm
Max Lift Above Ground17.2 in436.9 mm
Blade Tip Angle - Front44 degrees44 degrees
Blade Tip Angle - Rear2.5 degrees2.5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.