- Overall Length: 350 in / 8890 mm
- Wheelbase: 20.21 ft / 6160 mm
- Blade Base: 8.31 ft / 2530 mm
- Frame Circle Diameter: 5 ft / 1524 mm
Published dimensions and weight
John Deere 870G_GP
The John Deere 870G_GP is a motor grader; its full manufacturer specification sheet appears below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values40
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for John Deere 870G_GP include the published “Overall Length” field of 350 in / 8890 mm, the published “Wheelbase” field of 20.21 ft / 6160 mm, the published “Blade Base” field of 8.31 ft / 2530 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (350 in / 8890 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.21 ft / 6160 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Blade Base” field (8.31 ft / 2530 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length350 in8890 mm
Wheelbase20.21 ft6160 mm
Blade Base8.31 ft2530 mm
Frame Circle Diameter5 ft1524 mm
Height Over Rops10.44 ft3180 mm
Hydraulic Blade Tip - Forward4242
Hydraulic Blade Tip - Rearward55
Moldboard - Lift Above Ground17.8 in452 mm
Moldboard Height2.26 ft686 mm
Moldboard Sideshift - Left2.25 ft683 mm
Moldboard Sideshift - Right2.25 ft683 mm
Shoulder Reach - Left6.84 ft2083 mm
Shoulder Reach - Right7.65 ft2329 mm
Thickness - Moldboard0.09 ft25 mm
Turning Radius - Minimum23.66 ft7.21 m
Bank Angle9090
Width - Moldboard14.01 ft4270 mm
Circle Rotation360360
Frame Articulation2222
Driveline
Engine ModelPowerTech PSS 9.0LPowerTech PSS 9.0L
Displacement549.3 cu in9 L
Engine ManufacturerJohn DeereJohn Deere
Engine Output - Net280.3 hp209 kw
Torque Rise62 %62 %
Service Brake TypeMultiple Wet DiscsMultiple Wet Discs
Number Of Speeds - Forward88
Number Of Speeds - Reverse88
Service Brake ActuationHydraulicHydraulic
Tire Size - Standard14.00 - 2414.00 - 24
Transmission ManufacturerJohn DeereJohn Deere
Capacities
Fuel Tank - Diesel110.1 gal416.5 L
Hydraulic Tank16 gal60.5 L
Performance
System Voltage24 V24 V
Pump Flow57.6 gal/min218 L/min
Relief Pressure18961 psi130731.4 kPa
Loading - Front Axle9989.2 lb4531 kg
Loading - Rear Axle / Tandem27529.2 lb12487 kg
Speed 8 - Fwd45 (28)45 (28)
Speed 8 - Rev, Kph (Mph)45 (28)45 (28)
Weights
Weight With Push Block & Ripper44760.5 lb20303 kg
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.