- Overall Length: 27.27 ft / 8310 mm
- Width Over Tires: 7.85 ft / 2390 mm
- Wheelbase: 19.59 ft / 5970 mm
- Tandem Axle Wheelbase: 5.06 ft / 1540 mm
Published dimensions and weight
John Deere 672A
The John Deere 672A is a motor grader powered by a 125 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total27352 lb12407 kg
03Selected published values59
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for John Deere 672A include published moldboard width of 12 ft / 3.7 mm, published maximum power of 125 hp / 93.3 kw, published operating weight of 27352 lb / 12407 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.27 ft / 8310 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (7.85 ft / 2390 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (19.59 ft / 5970 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.27 ft8310 mm
Width Over Tires7.85 ft2390 mm
Wheelbase19.59 ft5970 mm
Tandem Axle Wheelbase5.06 ft1540 mm
Front Ground Clearance1.84 ft559 mm
Blade Base8.34 ft2540 mm
Height To Top Of Isomount Cab10.5 ft3200 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6-414T6-414T
Power Measured @2300 rpm2300 rpm
Torque Measured @1300 rpm1300 rpm
Max Power125 hp93.3 kw
Net Power Gears 7-8125 hp93.3 kw
Net Torque Gears 7-8372 lb ft504.4 Nm
Displacement414 cu in6.8 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle8702 lb3947 kg
Std Operation Weight - Rear Axle18650 lb8460 kg
Hydraulic System Fluid Capacity38 gal143.8 L
Std Operation Weight - Total27352 lb12407 kg
Max Operation Weight - Front Axle9128 lb4140 kg
Max Operation Weight - Rear Axle21726 lb9855 kg
Max Operation Weight - Total30854 lb13995 kg
Oil System Fluid Capacity5 gal18.9 L
Fuel Capacity60 gal227 L
Cooling System Fluid Capacity7 gal26.5 L
Circle Gearbox Fluid Capacity3 gal2.8 L
Tandem Case Fluid Capacity (Each)5 gal18.9 L
Tire Size13.00-2413.00-24
Operating Voltage25 V25 V
Alternator Supplied Amperage42 amps42 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius22.6 ft6.9 m
Transmission
Transmission Typepower shiftpower shift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward23.9 mph38.5 km/h
Max Speed - Reverse7.6 mph12.2 km/h
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total30 degrees30 degrees
Ground Clearance1.9 ft559 mm
Moldboard
Moldboard Width12 ft3.7 mm
Moldboard Height24 in610 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut6 in152 mm
Side Shift Left26.9 in683 mm
Side Shift Right26.9 in683 mm
Hydraulic System
Pump TypeClosed Center variable DisplacementClosed Center variable Displacement
Pump Flow37.6 gal/min142.4 L/min
Circle
Diameter58 in1.5 mm
Rotation360 degrees360 degrees
Shift Left34.4 in874 mm
Shift Right30 in762 mm
Max Reach Outside Tires - Left87.5 in2220 mm
Max Reach Outside Tires - Right84.7 in2150 mm
Max Lift Above Ground16.2 in409 mm
Blade Tip Angle - Front44 degrees44 degrees
Blade Tip Angle - Rear10 degrees10 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.