- Overall Length: 28.15 ft / 8580 mm
- Width Over Tires: 8.17 ft / 2490 mm
- Wheelbase: 19.59 ft / 5970 mm
- Tandem Axle Wheelbase: 5.06 ft / 1540 mm
Published dimensions and weight
John Deere 670C
The John Deere 670C is a motor grader powered by a 140 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total30500 lb13832 kg
03Selected published values62
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for John Deere 670C include published moldboard width of 12 ft / 3.7 mm, published maximum power of 140 hp / 104.4 kw, published operating weight of 30500 lb / 13832 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.15 ft / 8580 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.17 ft / 2490 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (19.59 ft / 5970 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.15 ft8580 mm
Width Over Tires8.17 ft2490 mm
Wheelbase19.59 ft5970 mm
Tandem Axle Wheelbase5.06 ft1540 mm
Front Ground Clearance2.01 ft610 mm
Blade Base8.76 ft2670 mm
Height To Top Of Isomount Cab10.18 ft3100 mm
Engine
Number Of Cylinders66
Engine Make22402240
Engine Model6068H6068H
Power Measured @2000 rpm2000 rpm
Torque Measured @1000 rpm1000 rpm
Max Power140 hp104.4 kw
Net Power Gears 7-8140 hp104.4 kw
Net Torque Gears 7-8496 lb ft672.5 Nm
Displacement414 cu in6.8 L
AspirationTurbocharged with AftercoolerTurbocharged with Aftercooler
Operational
Std Operation Weight - Front Axle8640 lb3919 kg
Std Operation Weight - Rear Axle21860 lb9913 kg
Hydraulic System Fluid Capacity15.5 gal59 L
Std Operation Weight - Total30500 lb13832 kg
Max Operation Weight - Front Axle9760 lb4427 kg
Max Operation Weight - Rear Axle25470 lb11551 kg
Oil System Fluid Capacity6.4 gal24 L
Max Operation Weight - Total35230 lb15977 kg
Fuel Capacity106 gal403 L
Cooling System Fluid Capacity11 gal42 L
Transmission Fluid Capacity10 gal38 L
Rear Diff/Final Drive Fluid Capacity9.5 gal36 L
Circle Gearbox Fluid Capacity4 gal3.8 L
Tandem Case Fluid Capacity (Each)20 gal75 L
Tire Size13.00-2413.00-24
Operating Voltage24 V24 V
Alternator Supplied Amperage55 amps55 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius22 ft6.7 m
Transmission
Transmission TypePower ShiftPower Shift
Number Of Gears - Forward88
Number Of Gears - Reverse88
Max Speed - Forward25 mph40.2 km/h
Max Speed - Reverse25 mph40.2 km/h
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance24 in610 mm
Moldboard
Moldboard Width12 ft3.7 mm
Moldboard Height24 in610 mm
Moldboard Thickness0.9 in22 mm
Side Shift Left26.9 in683 mm
Side Shift Right26.9 in683 mm
Blade Pull At Max Weight24248 lb10998.8 kg
Hydraulic System
Pump TypeClosed center variavle displacementClosed center variavle displacement
Pump Flow45.6 gal/min173 L/min
Relief Valve Pressure2550 psi17581.7 kPa
Circle
Diameter59.9 in1520 mm
Rotation360 degrees360 degrees
Shift Left31 in787 mm
Shift Right28.6 in724 mm
Max Reach Outside Tires - Left85.1 in2160 mm
Max Reach Outside Tires - Right83.1 in2110 mm
Max Lift Above Ground17.5 in444 mm
Blade Tip Angle - Front49 degrees49 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.