- Overall Length: 29.17 ft / 8890 mm
- Wheelbase: 20.21 ft / 6160 mm
- Blade Base: 8.86 ft / 2700 mm
- Height To Top Of Isomount Cab: 10.44 ft / 3180 mm
Published dimensions and weight
John Deere 772GP
The John Deere 772GP is a motor grader; its full manufacturer specification sheet appears below.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02WeightNot publishedNot published
03Selected published values28
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for John Deere 772GP include the published “Overall Length” field of 29.17 ft / 8890 mm, the published “Wheelbase” field of 20.21 ft / 6160 mm, the published “Blade Base” field of 8.86 ft / 2700 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (29.17 ft / 8890 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.21 ft / 6160 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Blade Base” field (8.86 ft / 2700 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length29.17 ft8890 mm
Wheelbase20.21 ft6160 mm
Blade Base8.86 ft2700 mm
Height To Top Of Isomount Cab10.44 ft3180 mm
Engine
Engine Make22402240
Engine ModelPowerTech™ PSSPowerTech™ PSS
Displacement415 cu in6.8 L
Operational
Hydraulic System Fluid Capacity16 gal60.5 L
Oil System Fluid Capacity8.4 gal31.5 L
Fuel Capacity110.1 gal416.5 L
Cooling System Fluid Capacity13.5 gal51 L
Transmission Fluid Capacity7.6 gal28.4 L
Circle Gearbox Fluid Capacity1.6 gal5.7 L
Steering
Turning Radius23.7 ft7.3 m
Transmission
Number Of Gears - Forward88
Number Of Gears - Reverse88
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance2 ft587 mm
Moldboard
Moldboard Height24.1 in610 mm
Moldboard Thickness0.9 in22 mm
Hydraulic System
Pump TypeClosed-center, pressure-compensated load-sensing (PCLS), variable-displacement piston pumpClosed-center, pressure-compensated load-sensing (PCLS), variable-displacement piston pump
Pump Flow56.1 gal/min212 L/min
Relief Valve Pressure2750.1 psi18961 kPa
Circle
Diameter60 in1524 mm
Rotation360 degrees360 degrees
Shift Left31 in787 mm
Shift Right31 in787 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.