- Overall Length: 28.89 ft / 8804 mm
- Width Over Tires: 8.24 ft / 2510 mm
- Wheelbase: 20.08 ft / 6120 mm
- Tandem Axle Wheelbase: 5.06 ft / 1540 mm
Published dimensions and weight
John Deere 772D
The John Deere 772D is a motor grader; its 6081H engine is rated at 215 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total34280 lb15549 kg
03Selected published values67
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for John Deere 772D include published moldboard width of 12.1 ft / 3660 mm, published maximum power of 230 hp / 171.6 kw, published operating weight of 34280 lb / 15549 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.89 ft / 8804 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.24 ft / 2510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.08 ft / 6120 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.89 ft8804 mm
Width Over Tires8.24 ft2510 mm
Wheelbase20.08 ft6120 mm
Tandem Axle Wheelbase5.06 ft1540 mm
Front Ground Clearance1.93 ft587 mm
Blade Base8.43 ft2568 mm
Height To Top Of Isomount Cab10.44 ft3180 mm
Engine
Number Of Cylinders66
Net Power Gear 4-6215 hp160 kw
Engine Make22402240
Engine Model6081H6081H
Net Power Gear 1-2185 hp138 kw
Power Measured @2000 rpm2000 rpm
Net Power Gear 5-6230 hp171.6 kw
Torque Measured @1000 rpm1000 rpm
Max Power230 hp171.6 kw
Net Power Gears 7-8215 hp160.4 kw
Net Torque Gears 1-2738 lb ft1000.6 Nm
Net Torque Gears 3-4778 lb ft1054.9 Nm
Net Torque Gears 5-6929 lb ft1259.6 Nm
Net Torque Gears 7-8929 lb ft1259.6 Nm
Displacement494 cu in8.1 L
AspirationTurbocharged with air-to-air aftercoolerTurbocharged with air-to-air aftercooler
Operational
Std Operation Weight - Front Axle9620 lb4364 kg
Std Operation Weight - Rear Axle24660 lb11186 kg
Hydraulic System Fluid Capacity14 gal53 L
Std Operation Weight - Total34280 lb15549 kg
Max Operation Weight - Front Axle15840.3 lb7185 kg
Max Operation Weight - Rear Axle32158.9 lb14587 kg
Max Operation Weight - Total47999.1 lb21772 kg
Fuel Capacity106 gal401.2 L
Cooling System Fluid Capacity13 gal49.2 L
Transmission Fluid Capacity6 gal22.7 L
Rear Diff/Final Drive Fluid Capacity9.5 gal36 L
Circle Gearbox Fluid Capacity1.5 gal5.7 L
Tandem Case Fluid Capacity (Each)20 gal75.7 L
Tire Size14.00R24 Radial PR14.00R24 Radial PR
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Steering
Articulation Angle22 degrees22 degrees
Turning Radius23.5 ft7.2 m
Transmission
Transmission TypePowershift with direct drivePowershift with direct drive
Number Of Gears - Forward88
Number Of Gears - Reverse88
Max Speed - Forward25.9 mph41.6 km/h
Max Speed - Reverse25.9 mph41.6 km/h
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance2 ft587 mm
Moldboard
Moldboard Width12.1 ft3660 mm
Moldboard Height24.1 in610 mm
Moldboard Thickness0.9 in22 mm
Side Shift Left26.8 in680 mm
Side Shift Right26.8 in680 mm
Blade Pull At Max Weight43200 lb19595 kg
Hydraulic System
Pump TypeVariable displacement pistonVariable displacement piston
Pump Flow54.7 gal/min207 L/min
Relief Valve Pressure2750 psi18960.6 kPa
Circle
Diameter59.9 in1520 mm
Rotation360 degrees360 degrees
Shift Left31 in787 mm
Shift Right28.6 in724 mm
Max Reach Outside Tires - Left82.5 in2100 mm
Max Reach Outside Tires - Right82 in2080 mm
Max Lift Above Ground18.5 in470 mm
Blade Tip Angle - Front42 degrees42 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.