- Overall Length: 27.92 ft / 8510 mm
- Wheelbase: 19.59 ft / 5970 mm
- Tandem Axle Wheelbase: 5.06 ft / 1540 mm
- Front Ground Clearance: 1.88 ft / 572 mm
Published dimensions and weight
John Deere 772BH
The John Deere 772BH is a motor grader powered by a 155 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total32500 lb14741.8 kg
03Selected published values57
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for John Deere 772BH include published operating weight of 32500 lb / 14741.8 kg, the published “Overall Length” field of 27.92 ft / 8510 mm, the published “Wheelbase” field of 19.59 ft / 5970 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.92 ft / 8510 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (19.59 ft / 5970 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Tandem Axle Wheelbase” field (5.06 ft / 1540 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.92 ft8510 mm
Wheelbase19.59 ft5970 mm
Tandem Axle Wheelbase5.06 ft1540 mm
Front Ground Clearance1.88 ft572 mm
Blade Base8.76 ft2670 mm
Height To Top Of Isomount Cab10.14 ft3090 mm
Engine
Number Of Cylinders66
Net Power Gear 1-3155 hp115.6 kw
Net Power Gear 4-6185 hp138 kw
Net Torque Gear 1-3522 lb ft707.8 Nm
Net Torque Gear 4-8615 lb ft833.9 Nm
Engine Model6076A6076A
Power Measured @2200 rpm2200 rpm
Torque Measured @1100 rpm1100 rpm
Displacement466.1 cu in7.7 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle9400 lb4263.8 kg
Hydraulic System Fluid Capacity23 gal87 L
Std Operation Weight - Rear Axle23100 lb10478 kg
Std Operation Weight - Total32500 lb14741.8 kg
Max Operation Weight - Front Axle10650 lb4830.8 kg
Max Operation Weight - Rear Axle26130 lb11852.4 kg
Oil System Fluid Capacity6.5 gal24.6 L
Max Operation Weight - Total36780 lb16683.2 kg
Fuel Capacity89.9 gal340 L
Cooling System Fluid Capacity10.1 gal38 L
Circle Gearbox Fluid Capacity1.1 gal3.8 L
Tandem Case Fluid Capacity (Each)5 gal18.9 L
Tire Size14.00-2414.00-24
Operating Voltage24 V24 V
Alternator Supplied Amperage50 amps50 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius22.6 ft6.9 m
Transmission
Transmission TypePower ShiftPower Shift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward25.3 mph40.6 km/h
Max Speed - Reverse8.6 mph13.8 km/h
Front Axle
Wheel Lean20 degrees20 degrees
Oscillation - Total32 degrees32 degrees
Ground Clearance1.9 ft572 mm
Moldboard
Moldboard Length12.1 ft3660 mm
Moldboard Height24.1 in610 mm
Moldboard Thickness0.9 in22 mm
Side Shift Left26.9 in683 mm
Side Shift Right26.9 in683 mm
Hydraulic System
Pump TypeClosed Center Variable DisplacementClosed Center Variable Displacement
Pump Flow52.4 gal/min198.4 L/min
Circle
Diameter59.1 in1500 mm
Rotation360 degrees360 degrees
Shift Left31 in787 mm
Shift Right28.6 in724 mm
Max Reach Outside Tires - Left85.1 in2160 mm
Max Reach Outside Tires - Right83.1 in2110 mm
Max Lift Above Ground18.6 in470 mm
Blade Tip Angle - Front49 degrees49 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.