- Transport Height: 8.99 ft / 2740 mm
- Wheelbase: 7 ft / 2133.6 mm
- Ground Clearance: 10.9 ft / 3322.32 mm
- Overall Height Canopy: 9 ft / 2743.2 mm
Published dimensions and weight
Case 570N EP
The Case 570N EP is a loader backhoe of about 5.1 t, built around the FPT F5HFL463D engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight11135.6 lb5051 kg
03Selected published values58
Loader backhoes are commonly used for digging, trenching, loading and general site work with one carrier. Published rows for Case 570N EP include published operating weight of 11135.6 lb / 5051 kg, published engine power of 74 hp / 55.2 kw, published hydraulic flow of 28.6 gal/min / 108 L/min. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Transport Height” field (8.99 ft / 2740 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (7 ft / 2133.6 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (10.9 ft / 3322.32 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Transport Height8.99 ft2740 mm
Wheelbase7 ft2133.6 mm
Ground Clearance10.9 ft3322.32 mm
Overall Height Canopy9 ft2743.2 mm
Height To Top Of Suspended Cab9 ft2743.2 mm
Cab Height106.8 in2712.72 mm
Overall Length202.76 in5150 mm
Overall Width6.8 ft2070 mm
Loader
Reach At Max Dump Height0.19 ft55.88 mm
CouplerPin-OnPin-On
Lift Capacity At Full Height6503 lb2949.72 kg
Dump Angle @ Max. Height46 degrees46 degrees
Electrical System
Battery850 cold-cranking850 cold-cranking
Alternator120 amps120 amps
Engine
Emissions CertificationTier 4 FinalTier 4 Final
FuelDieselDiesel
Fuel InjectionDirect, high pressure common rail – HPCRDirect, high pressure common rail – HPCR
Emission Tier LevelTier 4Tier 4
Engine OilCJ-4 – semi-synthetic 10W40CJ-4 – semi-synthetic 10W40
Engine Speed - Rated Speed, Full Load2200 rpm2200 rpm
Horsepower - Gross74 hp55.2 kw
Horsepower -Net72 hp53.7 kw
Number Of Cylinders44
Engine ModelFPT F5HFL463DFPT F5HFL463D
Engine TypeDiesel 4-stroke, TurbochargedDiesel 4-stroke, Turbocharged
Net Power72 hp53.7 kw
Gross Power74 hp55.2 kw
Power Measured @2200 rpm2200 rpm
Max Torque235 lb ft318.7 Nm
Torque Measured @1400 rpm1400 rpm
Net Torque Rise35 %35 %
Net Max Torque228 lb ft309.2 Nm
Displacement207.5 cu in3.4 L
Bore4.4 in110 mm
Stroke4.4 in110 mm
Operational
Operating Weight11135.6 lb5051 kg
Fuel Capacity30.2 gal114 L
Hydraulic System Fluid Capacity28.5 gal107.9 L
Oil System Fluid Capacity2.2 gal8 L
Front Axle Fluid Capacity0.2 gal0.7 L
Rear Axle Fluid Capacity3.6 gal13.6 L
Rear Tires Size 2wd/4wd19.5 L x 24.0, 10-ply19.5 L x 24.0, 10-ply
Operating Voltage12 V12 V
Transmission
Number Of Forward / Reverse Speeds44
Transmission TypeSyncroshuttleSyncroshuttle
Number Of Forward Gears44
Number Of Reverse Gears44
Max Speed - Forward24 mph38.7 km/h
Max Speed Reverse24 mph38.7 km/h
Bucket
Breakout Force, Lift9271 lb4205.3 kg
Bucket Hinge Pin Max Height11.3 ft3444.3 mm
Dump Clearance At Max Raise8.8 ft2682.3 mm
Digging Depth0.7 ft190.5 mm
Hydraulic
Pump TypeGearGear
Pump Flow Capacity28.6 gal/min108 L/min
Relief Valve Pressure3000 psi20684.3 kPa
Brakes
ActuationHydraulicHydraulic
Service BrakeWet Multi DiscWet Multi Disc
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.