Published dimensions and weight

JCB TM 300-52

The JCB TM 300-52 is a wheel loader of about 8.1 t; its 1104C-44TA engine is rated at 110 hp.

01Published dimensions and weight

Dimensions reference

Measurement reference — not to scale

01Dimensions referenceLength × width × height

02Operating Weight17772 lb8061.3 kg

03Selected published values42

Published highlights

Dump Clearance At Max Raise: 13.47 ft / 4105 mm
Bucket Capacity - Heaped: 1.31 yd3 / 1 m3
Bucket Width: 7.58 ft / 2310 mm
Breakout Force: 7630.02 lb / 33.94 kN

Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB TM 300-52 include published bucket capacity of 1.31 yd3 / 1 m3, published breakout force of 7630.02 lb / 33.94 kN, published operating weight of 17772 lb / 8061.3 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Dump Clearance At Max Raise” field (13.47 ft / 4105 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Bucket Capacity - Heaped” field (1.31 yd3 / 1 m3) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Bucket Width” field (7.58 ft / 2310 mm) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Bucket

Dump Clearance At Max Raise13.47 ft4105 mm

Bucket Capacity - Heaped1.31 yd31 m3

Bucket Width7.58 ft2310 mm

Breakout Force7630.02 lb33.94 kN

Dimensions

Ground Clearance1.45 ft440 mm

Length With Bucket On Ground21.76 ft6630 mm

Width Over Tires7.49 ft2280 mm

Height To Top Of Cab8.83 ft2690 mm

Wheelbase8.21 ft2500 mm

Hinge Pin - Max Height17.85 ft5440 mm

Reach At Max Lift And Dump3.59 ft1092 mm

Engine

Number Of Cylinders44

Engine Make22572257

Engine Model1104C-44TA1104C-44TA

Net Power110 hp82.1 kw

Gross Power121.4 hp90.6 kw

Power Measured @2000 rpm2000 rpm

Max Torque320 lb ft433.9 Nm

Displacement269 cu in4.5 L

Torque Measured @1400 rpm1400 rpm

AspirationTurbocharged / charge cooledTurbocharged / charge cooled

Operational

Operating Weight17772 lb8061.3 kg

Fuel Capacity26.5 gal100 L

Hydraulic System Fluid Capacity29.1 gal110 L

Engine Oil Fluid Capacity2.9 gal10.7 L

Cooling System Fluid Capacity5.3 gal20 L

Transmission Fluid Capacity5.1 gal19 L

Front Axle/Diff Fluid Capacity5.3 gal20 L

Rear Axle/Diff Fluid Capacity5.3 gal20 L

Static Tipping Weight9325.6 lb4230 kg

Turning Radius7.1 ft2150 mm

Operating Voltage12 V12 V

Alternator Supplied Amperage100 amps100 amps

Tire Size17.5x2417.5x24

Transmission

Transmission Type4 Speed Powershift4 Speed Powershift

Number Of Forward Gears44

Number Of Reverse Gears44

Max Speed - Forward21.8 mph35.1 km/h

Max Speed - Reverse21.8 mph35.1 km/h

Hydraulic System

Relief Valve Setting3336 psi23000.9 kPa

Pump Flow Capacity31.8 gal/min120 L/min

Pump TypeTwin GearTwin Gear

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View JCB TM 300-52 listings Get a valuation for your JCB TM 300-52 Post a want-to-buy request

Manufacturer-published specifications.

JCB TM 300-52

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other JCB models