Published dimensions and weight

JCB 411BHT

The JCB 411BHT is a wheel loader powered by a 80 hp engine.

01Published dimensions and weight

Dimensions reference

Measurement reference — not to scale

01Dimensions referenceLength × width × height

02WeightNot publishedNot published

03Selected published values46

Published highlights

Dump Clearance At Max Raise: 8.61 ft / 2624 mm
Bucket Capacity - Heaped: 1.57 yd3 / 1.2 m3
Bucket Capacity - Struck: 1.32 yd3 / 1.01 m3
Bucket Width: 7.39 ft / 2250 mm

Typical use

Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 411BHT include published bucket capacity of 1.57 yd3 / 1.2 m3, published breakout force of 16456.02 lb / 73.2 kN, published engine power of 90 hp / 67.2 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.

Buyer review notes

Compare the published “Dump Clearance At Max Raise” field (8.61 ft / 2624 mm) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Bucket Capacity - Heaped” field (1.57 yd3 / 1.2 m3) with the specific machine's configuration and records; options and condition can differ.
Compare the published “Bucket Capacity - Struck” field (1.32 yd3 / 1.01 m3) with the specific machine's configuration and records; options and condition can differ.

02Specifications

Published values, clearly grouped.

Published specifications and measurements are organized by section for quick reference.

Bucket

Dump Clearance At Max Raise8.61 ft2624 mm

Bucket Capacity - Heaped1.57 yd31.2 m3

Bucket Capacity - Struck1.32 yd31.01 m3

Bucket Width7.39 ft2250 mm

Breakout Force16456.02 lb73.2 kN

Dimensions

Ground Clearance1.35 ft410 mm

Length With Bucket On Ground19.53 ft5952 mm

Width Over Tires7.23 ft2203 mm

Height To Top Of Cab9.89 ft3013 mm

Wheelbase8.86 ft2700 mm

Hinge Pin - Max Height11.45 ft3487 mm

Reach At Max Lift And Dump3.04 ft925 mm

Engine

Number Of Cylinders44

Engine Make23512351

Engine Model1004-4TLR21004-4TLR2

Net Power80 hp59.7 kw

Gross Power90 hp67.2 kw

Power Measured @2200 rpm2200 rpm

Max Torque239.8 lb ft325 Nm

Displacement243.5 cu in4 L

Torque Measured @1400 rpm1400 rpm

Aspirationturbochargedturbocharged

Operational

Fuel Capacity33.1 gal125 L

Hydraulic System Fluid Capacity29.1 gal110 L

Engine Oil Fluid Capacity2.7 gal10 L

Cooling System Fluid Capacity5.7 gal21.5 L

Transmission Fluid Capacity4.8 gal18 L

Front Axle/Diff Fluid Capacity6.7 gal25 L

Rear Axle/Diff Fluid Capacity6.7 gal25 L

Static Tipping Weight11834.5 lb5368 kg

Turning Radius16.9 ft5150 mm

Operating Voltage12 V12 V

Alternator Supplied Amperage72 amps72 amps

Rear Axle Oscillation25 degrees25 degrees

Tire Size15.5x25x12 SGL15.5x25x12 SGL

Transmission

Transmission Typesemi automatic full powershiftsemi automatic full powershift

Number Of Forward Gears44

Number Of Reverse Gears33

Max Speed - Forward24.3 mph39 km/h

Max Speed - Reverse16.2 mph26 km/h

Hydraulic System

Relief Valve Setting3190 psi21994.3 kPa

Pump Flow Capacity13.4 gal/min50.6 L/min

Raise Time4.6 sec4.6 sec

Dump Time1.4 sec1.4 sec

Lower Time3 sec3 sec

Pump Typedouble gear pump with automatic unloaderdouble gear pump with automatic unloader

Need the machine, not just the numbers?

Find one, value one, or tell the market what you need.

View JCB 411BHT listings Get a valuation for your JCB 411BHT Post a want-to-buy request

Manufacturer-published specifications.

JCB 411BHT

Published values, clearly grouped.

Find one, value one, or tell the market what you need.

Other JCB models