- Dump Clearance At Max Raise: 9.13 ft / 2780 mm
- Bucket Capacity - Heaped: 1.57 yd3 / 1.2 m3
- Bucket Capacity - Struck: 1.33 yd3 / 1.01 m3
- Bucket Width: 7.39 ft / 2250 mm
Published dimensions and weight
JCB 411HT
The JCB 411HT is a 8.8 t-class wheel loader with a 85.3 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight19365.5 lb8784 kg
03Selected published values55
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 411HT include published bucket capacity of 1.57 yd3 / 1.2 m3, published breakout force of 16456.02 lb / 73.2 kN, published operating weight of 19365.5 lb / 8784 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.13 ft / 2780 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.57 yd3 / 1.2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.33 yd3 / 1.01 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.13 ft2780 mm
Bucket Capacity - Heaped1.57 yd31.2 m3
Bucket Capacity - Struck1.33 yd31.01 m3
Bucket Width7.39 ft2250 mm
Breakout Force16456.02 lb73.2 kN
Dimensions
Ground Clearance1.13 ft344 mm
Length With Bucket On Ground20.44 ft6229 mm
Width Over Tires7.24 ft2204 mm
Height To Top Of Cab10.03 ft3057 mm
Wheelbase9.03 ft2750 mm
Hinge Pin - Max Height11.71 ft3569 mm
Reach At Max Lift And Dump3.04 ft926 mm
Engine
Number Of Cylinders44
Engine Make22572257
Engine ModelJCB EcoMAX T4FJCB EcoMAX T4F
Engine Type4 stroke direct injection4 stroke direct injection
Net Power85.3 hp63.7 kw
Gross Power109 hp81.3 kw
Power Measured @2200 rpm2200 rpm
Max Torque516 Nm516 Nm
Displacement268.6 cu in4.4 L
Torque Measured @1450 rpm1450 rpm
AspirationTurbo chargedTurbo charged
Bore4.1 in103 mm
Stroke5.2 in132 mm
Operational
Def Tank Capacity5.3 gal20 L
Auxiliary Fuel Tank29.4 gal111 L
Operating Weight19365.5 lb8784 kg
Fuel Capacity30.7 gal116 L
Hydraulic System Fluid Capacity41 gal155 L
Engine Oil Fluid Capacity3.1 gal11.5 L
Cooling System Fluid Capacity6.1 gal23 L
Transmission Fluid Capacity7.2 gal27 L
Front Axle/Diff Fluid Capacity6.7 gal25 L
Rear Axle/Diff Fluid Capacity6.7 gal25 L
Static Tipping Weight11834.5 lb5368 kg
Turning Radius17.8 ft5414 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation11 degrees11 degrees
Tire SizeMichelin 15.5R25 XHA (L3)Michelin 15.5R25 XHA (L3)
Articulation Angle40 degrees40 degrees
Transmission
Transmission TypeSmooth shift Powershift ZF 4WG115Smooth shift Powershift ZF 4WG115
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward31.1 mph50 km/h
Max Speed - Reverse23.7 mph38.1 km/h
Hydraulic System
Max Operating Pressure220 bar220 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity13.4 gal/min50.6 L/min
Raise Time5 sec5 sec
Dump Time1.1 sec1.1 sec
Lower Time3.7 sec3.7 sec
Total Cycle9.8 sec9.8 sec
Pump TypeDouble gear pumpDouble gear pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.