- Dump Clearance At Max Raise: 8.99 ft / 2740 mm
- Bucket Capacity - Heaped: 4.06 yd3 / 3.1 m3
- Bucket Capacity - Struck: 3.66 yd3 / 2.8 m3
- Bucket Width: 9.31 ft / 2837 mm
Published dimensions and weight
JCB 457 ZX
Weighing roughly 19.8 t and rated at 256 hp, the JCB 457 ZX is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight43594.3 lb19774 kg
03Selected published values55
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 457 ZX include published bucket capacity of 4.06 yd3 / 3.1 m3, published breakout force of 38667.14 lb / 172 kN, published operating weight of 43594.3 lb / 19774 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.99 ft / 2740 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.06 yd3 / 3.1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.66 yd3 / 2.8 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.99 ft2740 mm
Bucket Capacity - Heaped4.06 yd33.1 m3
Bucket Capacity - Struck3.66 yd32.8 m3
Bucket Width9.31 ft2837 mm
Breakout Force38667.14 lb172 kN
Dimensions
Ground Clearance1.56 ft473 mm
Length With Bucket On Ground26.12 ft7961 mm
Width Over Tires8.86 ft2699 mm
Height To Top Of Cab11.27 ft3433 mm
Wheelbase10.83 ft3300 mm
Hinge Pin - Max Height13.49 ft4110 mm
Reach At Max Lift And Dump4.27 ft1301 mm
Engine
Emission Tier LevelEPA 40 CFR 89 / Tier 4 Final EU 97/68/EC/STAGE IVEPA 40 CFR 89 / Tier 4 Final EU 97/68/EC/STAGE IV
Number Of Cylinders66
No. Of Valves44
Engine Model6R10006R1000
Engine TypeMTUMTU
Net Power256 hp190.9 kw
Air CleanerIntergrated pre-cleaner, scavengedIntergrated pre-cleaner, scavenged
Gross Power258 hp192.4 kw
Power Measured @1600 rpm1600 rpm
Max Torque1150 Nm1150 Nm
Displacement469.9 cu in7.7 L
Torque Measured @1600 rpm1600 rpm
AspirationTurbo ChargedTurbo Charged
Fan Drive TypeHydraulicHydraulic
Operational
Def Tank Capacity11.1 gal42 L
Full Turn Tipping Load30717.1 lb13933 kg
Payload15359.7 lb6967 kg
Operating Weight43594.3 lb19774 kg
Fuel Capacity79.3 gal300 L
Hydraulic System Fluid Capacity35.7 gal135 L
Engine Oil Fluid Capacity6.7 gal25 L
Cooling System Fluid Capacity11.1 gal42 L
Transmission Fluid Capacity10.9 gal41 L
Front Axle/Diff Fluid Capacity9.3 gal35 L
Rear Axle/Diff Fluid Capacity9.3 gal35 L
Turning Radius21.6 ft6554 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation11.5 degrees11.5 degrees
Articulation Angle40 degrees40 degrees
Transmission
Transmission Type4 speed non-lock up converter ZF 4WG2104 speed non-lock up converter ZF 4WG210
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward22.5 mph36.1 km/h
Max Speed - Reverse14.7 mph23.5 km/h
Hydraulic System
Max Operating Pressure220 bar220 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity40.5 gal/min153 L/min
Raise Time5.8 sec5.8 sec
Dump Time1.2 sec1.2 sec
Lower Time4.1 sec4.1 sec
Total Cycle11.1 sec11.1 sec
Pump TypeVariable displacementVariable displacement
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.