- Dump Clearance At Max Raise: 9.06 ft / 2760 mm
- Bucket Capacity - Heaped: 4.06 yd3 / 3.1 m3
- Bucket Capacity - Struck: 3.66 yd3 / 2.8 m3
- Bucket Width: 9.31 ft / 2837 mm
Published dimensions and weight
JCB 446ZX
The JCB 446ZX pairs the 6CT8.3C engine (185 hp) with an operating weight near 20.6 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight45492.4 lb20635 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 446ZX include published bucket capacity of 4.06 yd3 / 3.1 m3, published breakout force of 38667.14 lb / 172 kN, published operating weight of 45492.4 lb / 20635 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.06 ft / 2760 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (4.06 yd3 / 3.1 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (3.66 yd3 / 2.8 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.06 ft2760 mm
Bucket Capacity - Heaped4.06 yd33.1 m3
Bucket Capacity - Struck3.66 yd32.8 m3
Bucket Width9.31 ft2837 mm
Breakout Force38667.14 lb172 kN
Dimensions
Ground Clearance1.55 ft470 mm
Length With Bucket On Ground26.12 ft7960 mm
Width Over Tires8.87 ft2702 mm
Height To Top Of Cab11.06 ft3370 mm
Wheelbase10.83 ft3300 mm
Hinge Pin - Max Height13.48 ft4107 mm
Reach At Max Lift And Dump3.63 ft1105 mm
Engine
Number Of Cylinders66
Engine Make22572257
Engine Model6CT8.3C6CT8.3C
Net Power185 hp138 kw
Gross Power193 hp144 kw
Power Measured @2200 rpm2200 rpm
Max Torque665.3 lb ft902 Nm
Displacement506.5 cu in8.3 L
Torque Measured @1400 rpm1400 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight45492.4 lb20635 kg
Fuel Capacity84.6 gal320 L
Hydraulic System Fluid Capacity56.8 gal215 L
Engine Oil Fluid Capacity5 gal18.9 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity9 gal34 L
Front Axle/Diff Fluid Capacity18.3 gal69 L
Rear Axle/Diff Fluid Capacity13.5 gal51 L
Static Tipping Weight23003.1 lb10434 kg
Turning Radius21.6 ft6554 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation25 degrees25 degrees
Tire Size23.5R25 HXA (L3)23.5R25 HXA (L3)
Transmission
Transmission Typesmooth shift powershiftsmooth shift powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward23.3 mph37.4 km/h
Max Speed - Reverse15.2 mph24.4 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity43.1 gal/min163 L/min
Raise Time5.8 sec5.8 sec
Dump Time1.2 sec1.2 sec
Lower Time4.1 sec4.1 sec
Pump Typetwin variable displacement piston pumptwin variable displacement piston pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.