- Dump Clearance At Max Raise: 9.33 ft / 2843 mm
- Bucket Capacity - Heaped: 3.01 yd3 / 2.3 m3
- Bucket Capacity - Struck: 2.6 yd3 / 1.99 m3
- Bucket Width: 8.99 ft / 2740 mm
Published dimensions and weight
JCB 436ZX
The JCB 436ZX is a wheel loader of about 16.3 t, built around the BTAA 5.9C engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight35972.9 lb16317 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 436ZX include published bucket capacity of 3.01 yd3 / 2.3 m3, published breakout force of 39566.38 lb / 176 kN, published operating weight of 35972.9 lb / 16317 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.33 ft / 2843 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (3.01 yd3 / 2.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.6 yd3 / 1.99 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.33 ft2843 mm
Bucket Capacity - Heaped3.01 yd32.3 m3
Bucket Capacity - Struck2.6 yd31.99 m3
Bucket Width8.99 ft2740 mm
Breakout Force39566.38 lb176 kN
Dimensions
Ground Clearance1.51 ft459 mm
Length With Bucket On Ground23.51 ft7163 mm
Width Over Tires8.53 ft2597 mm
Height To Top Of Cab10.88 ft3315 mm
Wheelbase9.85 ft3000 mm
Hinge Pin - Max Height13.12 ft3996 mm
Reach At Max Lift And Dump4.12 ft1254 mm
Engine
Number Of Cylinders66
Engine Make22572257
Engine ModelBTAA 5.9CBTAA 5.9C
Net Power173 hp129.1 kw
Gross Power177 hp132 kw
Power Measured @2200 rpm2200 rpm
Max Torque579.8 lb ft786 Nm
Displacement360.1 cu in5.9 L
Torque Measured @1300 rpm1300 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight35972.9 lb16317 kg
Fuel Capacity60.8 gal230 L
Hydraulic System Fluid Capacity55.5 gal210 L
Engine Oil Fluid Capacity3.7 gal14 L
Cooling System Fluid Capacity9.3 gal35 L
Transmission Fluid Capacity9 gal34 L
Front Axle/Diff Fluid Capacity10.4 gal39 L
Rear Axle/Diff Fluid Capacity10.4 gal39 L
Static Tipping Weight22160.9 lb10052 kg
Turning Radius19.4 ft5900 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation25 degrees25 degrees
Tire Size20.5R25 HXA (L3)20.5R25 HXA (L3)
Transmission
Transmission Typesmooth shift powershiftsmooth shift powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24.3 mph39 km/h
Max Speed - Reverse16.5 mph26.5 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity34.9 gal/min132 L/min
Raise Time5.9 sec5.9 sec
Dump Time1 sec1 sec
Lower Time3.4 sec3.4 sec
Pump Typetwin variable displacement piston pumpstwin variable displacement piston pumps
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.