- Dump Clearance At Max Raise: 9.64 ft / 2938 mm
- Bucket Capacity - Heaped: 2.49 yd3 / 1.9 m3
- Bucket Capacity - Struck: 2.12 yd3 / 1.62 m3
- Bucket Width: 8.36 ft / 2548 mm
Published dimensions and weight
JCB 435S
The JCB 435S is a wheel loader of about 14.1 t; its QSB engine is rated at 206 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight30986 lb14055 kg
03Selected published values51
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 435S include published bucket capacity of 2.49 yd3 / 1.9 m3, published breakout force of 31023.64 lb / 138 kN, published operating weight of 30986 lb / 14055 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.64 ft / 2938 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.49 yd3 / 1.9 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.12 yd3 / 1.62 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.64 ft2938 mm
Bucket Capacity - Heaped2.49 yd31.9 m3
Bucket Capacity - Struck2.12 yd31.62 m3
Bucket Width8.36 ft2548 mm
Breakout Force31023.64 lb138 kN
Dimensions
Ground Clearance1.62 ft491 mm
Length With Bucket On Ground23.64 ft7203 mm
Width Over Tires9.72 ft2961 mm
Height To Top Of Cab12.28 ft3742 mm
Wheelbase10.01 ft3050 mm
Hinge Pin - Max Height12.88 ft3923 mm
Reach At Max Lift And Dump2.69 ft818 mm
Engine
Emission Tier LevelEU Stage IV, US EPA Tier 4FEU Stage IV, US EPA Tier 4F
Number Of Cylinders66
No. Of Valves44
Engine ModelQSBQSB
Engine TypeCumminsCummins
Net Power206 hp153.7 kw
Air CleanerCyclonic pre-filter with engine fan scavenge systemCyclonic pre-filter with engine fan scavenge system
Gross Power230 hp171.6 kw
Power Measured @2100 rpm2100 rpm
Max Torque945 Nm945 Nm
Displacement408.9 cu in6.7 L
Torque Measured @1500 rpm1500 rpm
AspirationTurbo ChargedTurbo Charged
Fan Drive TypeHydraulically driven cooling fanHydraulically driven cooling fan
Operational
Def Tank Capacity10.6 gal40 L
Auxiliary Fuel Tank105.7 gal400 L
Full Turn Tipping Load20494.2 lb9296 kg
Payload10247.1 lb4648 kg
Operating Weight30986 lb14055 kg
Fuel Capacity105.7 gal400 L
Hydraulic System Fluid Capacity55.5 gal210 L
Turning Radius19.4 ft5902 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage120 amps120 amps
Rear Axle Oscillation10.5 degrees10.5 degrees
Articulation Angle40 degrees40 degrees
Transmission
Transmission Type6 speed with lock up converter ZF 6WG2106 speed with lock up converter ZF 6WG210
Number Of Forward Gears66
Number Of Reverse Gears33
Max Speed - Forward32.5 mph52.3 km/h
Max Speed - Reverse22.5 mph36.1 km/h
Hydraulic System
Max Operating Pressure250 bar250 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity34.9 gal/min132 L/min
Raise Time4.7 sec4.7 sec
Dump Time1.8 sec1.8 sec
Lower Time2.8 sec2.8 sec
Total Cycle9.3 sec9.3 sec
Pump TypeTwin variable displacement piston pumpsTwin variable displacement piston pumps
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.