- Dump Clearance At Max Raise: 9.18 ft / 2797 mm
- Bucket Capacity - Heaped: 2.62 yd3 / 2 m3
- Bucket Capacity - Struck: 2.26 yd3 / 1.73 m3
- Bucket Width: 8.37 ft / 2550 mm
Published dimensions and weight
JCB 427 ZX
The JCB 427 ZX is a wheel loader of about 13.7 t, powered by a 146 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight30102 lb13654 kg
03Selected published values50
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 427 ZX include published bucket capacity of 2.62 yd3 / 2 m3, published breakout force of 30349.21 lb / 135 kN, published operating weight of 30102 lb / 13654 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.18 ft / 2797 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.62 yd3 / 2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.26 yd3 / 1.73 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.18 ft2797 mm
Bucket Capacity - Heaped2.62 yd32 m3
Bucket Capacity - Struck2.26 yd31.73 m3
Bucket Width8.37 ft2550 mm
Breakout Force30349.21 lb135 kN
Dimensions
Ground Clearance1.55 ft472 mm
Length With Bucket On Ground23.2 ft7069 mm
Width Over Tires8.15 ft2483 mm
Height To Top Of Cab11.03 ft3360 mm
Wheelbase10.01 ft3050 mm
Hinge Pin - Max Height12.81 ft3904 mm
Reach At Max Lift And Dump3.65 ft1111 mm
Engine
Emission Tier LevelEU Stage IV, US EPA Tier 4FEU Stage IV, US EPA Tier 4F
Number Of Cylinders66
No. Of Valves44
Engine ModelQSBQSB
Engine TypeCumminsCummins
Net Power146 hp108.9 kw
Air CleanerCyclonic pre filter with engine fan scavenge systemCyclonic pre filter with engine fan scavenge system
Gross Power179 hp133.5 kw
Power Measured @2100 rpm2100 rpm
Max Torque841 Nm841 Nm
Displacement408.9 cu in6.7 L
Torque Measured @1500 rpm1500 rpm
AspirationTurbo ChargedTurbo Charged
Fan Drive TypeHydraulically driven cooling fanHydraulically driven cooling fan
Operational
Def Tank Capacity10.6 gal40 L
Full Turn Tipping Load19559.5 lb8872 kg
Payload9779.8 lb4436 kg
Operating Weight30102 lb13654 kg
Fuel Capacity76.7 gal290 L
Hydraulic System Fluid Capacity55.5 gal210 L
Turning Radius19.5 ft5933 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage120 amps120 amps
Rear Axle Oscillation10.5 degrees10.5 degrees
Articulation Angle40 degrees40 degrees
Transmission
Transmission Type4 speed non-lock up converter 4WG4 speed non-lock up converter 4WG
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24 mph38.5 km/h
Max Speed - Reverse15.4 mph24.7 km/h
Hydraulic System
Max Operating Pressure250 bar250 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity33.3 gal/min126 L/min
Raise Time5.1 sec5.08 sec
Dump Time1.5 sec1.41 sec
Lower Time3.3 sec3.3 sec
Total Cycle9.8 sec9.79 sec
Pump TypeVariable displacementVariable displacement
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.