- Dump Clearance At Max Raise: 9.36 ft / 2850 mm
- Bucket Capacity - Heaped: 2.36 yd3 / 1.8 m3
- Bucket Capacity - Struck: 2.04 yd3 / 1.56 m3
- Bucket Width: 8.37 ft / 2550 mm
Published dimensions and weight
JCB 426ZX
The JCB 426ZX pairs the BTAA5.9C engine (150 hp) with an operating weight near 12.9 t.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight28329.4 lb12850 kg
03Selected published values47
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 426ZX include published bucket capacity of 2.36 yd3 / 1.8 m3, published breakout force of 32597.3 lb / 145 kN, published operating weight of 28329.4 lb / 12850 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.36 ft / 2850 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.36 yd3 / 1.8 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (2.04 yd3 / 1.56 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.36 ft2850 mm
Bucket Capacity - Heaped2.36 yd31.8 m3
Bucket Capacity - Struck2.04 yd31.56 m3
Bucket Width8.37 ft2550 mm
Breakout Force32597.3 lb145 kN
Dimensions
Ground Clearance1.46 ft442 mm
Length With Bucket On Ground22.15 ft6750 mm
Width Over Tires8.15 ft2482 mm
Height To Top Of Cab10.88 ft3315 mm
Wheelbase9.85 ft3000 mm
Hinge Pin - Max Height11.96 ft3645 mm
Reach At Max Lift And Dump3.55 ft1081 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelBTAA5.9CBTAA5.9C
Net Power150 hp111.9 kw
Gross Power152 hp113.4 kw
Power Measured @2200 rpm2200 rpm
Max Torque455.1 lb ft617 Nm
Displacement360.1 cu in5.9 L
Torque Measured @1600 rpm1600 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight28329.4 lb12850 kg
Fuel Capacity60.8 gal230 L
Hydraulic System Fluid Capacity55.5 gal210 L
Engine Oil Fluid Capacity3.7 gal14 L
Cooling System Fluid Capacity9.3 gal35 L
Transmission Fluid Capacity8 gal30 L
Front Axle/Diff Fluid Capacity10.4 gal39 L
Rear Axle/Diff Fluid Capacity9.8 gal37 L
Static Tipping Weight19996 lb9070 kg
Turning Radius19 ft5790 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Rear Axle Oscillation25 degrees25 degrees
Tire Size20.5R25 XHA (L3)20.5R25 XHA (L3)
Transmission
Transmission Typesmooth powershiftsmooth powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24 mph38.5 km/h
Max Speed - Reverse15.1 mph24.3 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity34.9 gal/min132 L/min
Raise Time4.4 sec4.4 sec
Dump Time1 sec1 sec
Lower Time2.7 sec2.7 sec
Pump Typetwin variable displacement piston pumps w/ load sensing systemtwin variable displacement piston pumps w/ load sensing system
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.