- Dump Clearance At Max Raise: 9.29 ft / 2831 mm
- Breakout Force: 31023.64 lb / 138 kN
- Bucket Capacity - Heaped: 2.36 yd3 / 1.8 m3
- Bucket Capacity - Struck: 2.04 yd3 / 1.56 m3
Published dimensions and weight
JCB 426HTM
The JCB 426HTM is a wheel loader of about 14.2 t; its BTAA5.9C engine is rated at 150 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight31327.7 lb14210 kg
03Selected published values44
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 426HTM include published bucket capacity of 2.36 yd3 / 1.8 m3, published breakout force of 31023.64 lb / 138 kN, published operating weight of 31327.7 lb / 14210 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.29 ft / 2831 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Breakout Force” field (31023.64 lb / 138 kN) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.36 yd3 / 1.8 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.29 ft2831 mm
Breakout Force31023.64 lb138 kN
Bucket Capacity - Heaped2.36 yd31.8 m3
Bucket Capacity - Struck2.04 yd31.56 m3
Bucket Width8.37 ft2550 mm
Dimensions
Ground Clearance1.46 ft442 mm
Length With Bucket On Ground22.15 ft6750 mm
Height To Top Of Cab10.88 ft3315 mm
Wheelbase9.85 ft3000 mm
Hinge Pin - Max Height11.9 ft3627 mm
Reach At Max Lift And Dump3.55 ft1081 mm
Engine
Number Of Cylinders66
Engine ModelBTAA5.9CBTAA5.9C
Net Power150 hp111.9 kw
Gross Power152 hp113.4 kw
Power Measured @2200 rpm2200 rpm
Max Torque455.1 lb ft617 Nm
Displacement360.1 cu in5.9 L
Torque Measured @1600 rpm1600 rpm
Aspirationturbochargedturbocharged
Operational
Operating Weight31327.7 lb14210 kg
Fuel Capacity60.8 gal230 L
Hydraulic System Fluid Capacity55.5 gal210 L
Engine Oil Fluid Capacity3.7 gal14 L
Cooling System Fluid Capacity9.3 gal35 L
Transmission Fluid Capacity8 gal30 L
Front Axle/Diff Fluid Capacity10.4 gal39 L
Rear Axle/Diff Fluid Capacity9.8 gal37 L
Static Tipping Weight19158.2 lb8690 kg
Turning Radius19.3 ft5860 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage70 amps70 amps
Tire Size20.5r25 HXA (L3)20.5r25 HXA (L3)
Transmission
Transmission Typesmooth powershiftsmooth powershift
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward24 mph38.5 km/h
Max Speed - Reverse15.1 mph24.3 km/h
Hydraulic System
Relief Valve Setting3625 psi24993.5 kPa
Pump Flow Capacity34.9 gal/min132 L/min
Raise Time4.4 sec4.4 sec
Dump Time1 sec1 sec
Lower Time2.7 sec2.7 sec
Pump Typetwin variable displacement piston pumps w/ load sensing systemtwin variable displacement piston pumps w/ load sensing system
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.