- Dump Clearance At Max Raise: 9.03 ft / 2750 mm
- Bucket Capacity - Heaped: 2.1 yd3 / 1.6 m3
- Bucket Capacity - Struck: 1.78 yd3 / 1.36 m3
- Bucket Width: 7.88 ft / 2400 mm
Published dimensions and weight
JCB 419S HT
The JCB 419S HT is a wheel loader of about 10.6 t, powered by a 183 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight23397.7 lb10613 kg
03Selected published values51
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 419S HT include published bucket capacity of 2.1 yd3 / 1.6 m3, published breakout force of 20682.43 lb / 92 kN, published operating weight of 23397.7 lb / 10613 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.03 ft / 2750 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.1 yd3 / 1.6 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.78 yd3 / 1.36 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.03 ft2750 mm
Bucket Capacity - Heaped2.1 yd31.6 m3
Bucket Capacity - Struck1.78 yd31.36 m3
Bucket Width7.88 ft2400 mm
Breakout Force20682.43 lb92 kN
Dimensions
Ground Clearance1.65 ft502 mm
Length With Bucket On Ground21.75 ft6627 mm
Width Over Tires8.78 ft2674 mm
Height To Top Of Cab10.47 ft3191 mm
Wheelbase9.36 ft2850 mm
Hinge Pin - Max Height12.14 ft3700 mm
Reach At Max Lift And Dump2.76 ft840 mm
Engine
Emission Tier LevelEU Stage IV, US EPA Tier 4FEU Stage IV, US EPA Tier 4F
Number Of Cylinders66
No. Of Valves44
Engine ModelQSBQSB
Engine TypeCumminsCummins
Net Power183 hp136.5 kw
Air CleanerCyclonic pre-filter with engine fan scavenge systemCyclonic pre-filter with engine fan scavenge system
Gross Power173 hp129.1 kw
Power Measured @2100 rpm2100 rpm
Max Torque841 Nm841 Nm
Displacement408.9 cu in6.7 L
Torque Measured @1500 rpm1500 rpm
AspirationTurbo ChargedTurbo Charged
Fan Drive TypeHydraulically driven cooling fanHydraulically driven cooling fan
Operational
Def Tank Capacity6.3 gal23.8 L
Auxiliary Fuel Tank66.1 gal250 L
Full Turn Tipping Load15366.3 lb6970 kg
Payload7683.2 lb3485 kg
Operating Weight23397.7 lb10613 kg
Fuel Capacity66.1 gal250 L
Hydraulic System Fluid Capacity41 gal155 L
Turning Radius18.9 ft5740 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage120 amps120 amps
Rear Axle Oscillation9 degrees9 degrees
Articulation Angle38 degrees38 degrees
Transmission
Transmission Type6 speed non-lock up converter ZF6 speed non-lock up converter ZF
Number Of Forward Gears66
Number Of Reverse Gears33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse20 mph32.1 km/h
Hydraulic System
Max Operating Pressure230 bar230 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity47.6 gal/min180 L/min
Raise Time3.9 sec3.86 sec
Dump Time1.6 sec1.53 sec
Lower Time2.4 sec2.4 sec
Total Cycle7.8 sec7.79 sec
Pump TypeVariable placementVariable placement
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.