- Dump Clearance At Max Raise: 8.91 ft / 2714 mm
- Bucket Capacity - Heaped: 1.84 yd3 / 1.4 m3
- Bucket Capacity - Struck: 1.55 yd3 / 1.18 m3
- Bucket Width: 7.88 ft / 2400 mm
Published dimensions and weight
JCB 417 HT
Weighing roughly 9.7 t and rated at 125 hp, the JCB 417 HT is a wheel loader in its size class.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight21422.4 lb9717 kg
03Selected published values46
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 417 HT include published bucket capacity of 1.84 yd3 / 1.4 m3, published breakout force of 15736.63 lb / 70 kN, published operating weight of 21422.4 lb / 9717 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.91 ft / 2714 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.84 yd3 / 1.4 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.55 yd3 / 1.18 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.91 ft2714 mm
Bucket Capacity - Heaped1.84 yd31.4 m3
Bucket Capacity - Struck1.55 yd31.18 m3
Bucket Width7.88 ft2400 mm
Breakout Force15736.63 lb70 kN
Dimensions
Ground Clearance1.22 ft371 mm
Length With Bucket On Ground20.64 ft6290 mm
Width Over Tires7.64 ft2328 mm
Height To Top Of Cab10.12 ft3084 mm
Wheelbase9.19 ft2800 mm
Hinge Pin - Max Height11.7 ft3566 mm
Reach At Max Lift And Dump3.06 ft930 mm
Engine
Number Of Cylinders44
Engine ModelJCB EcoMAX T4FJCB EcoMAX T4F
Engine Type4 stroke direct injection4 stroke direct injection
Gross Power125 hp93.3 kw
Power Measured @2200 rpm2200 rpm
Max Torque550 Nm550 Nm
Displacement268.6 cu in4.4 L
Torque Measured @1500 rpm1500 rpm
AspirationTurbo chargedTurbo charged
Bore4.1 in103 mm
Stroke5.2 in132 mm
Operational
Def Tank Capacity5.3 gal20 L
Auxiliary Fuel Tank29.4 gal111 L
Operating Weight21422.4 lb9717 kg
Fuel Capacity30.7 gal116 L
Hydraulic System Fluid Capacity41 gal155 L
Turning Radius18.2 ft5519 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation11 degrees11 degrees
Articulation Angle40 degrees40 degrees
Transmission
Transmission TypeSmooth shift Powershift ZF 4WG115Smooth shift Powershift ZF 4WG115
Number Of Forward Gears44
Number Of Reverse Gears33
Max Speed - Forward31.1 mph50 km/h
Max Speed - Reverse23.7 mph38 km/h
Hydraulic System
Max Operating Pressure240 bar240 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity41.3 gal/min156 L/min
Raise Time4.9 sec4.9 sec
Dump Time2.1 sec2.1 sec
Lower Time3.3 sec3.3 sec
Total Cycle10.3 sec10.3 sec
Pump TypeVariable placement piston pumpVariable placement piston pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.