- Dump Clearance At Max Raise: 9.11 ft / 2775 mm
- Bucket Capacity - Heaped: 1.57 yd3 / 1.2 m3
- Bucket Capacity - Struck: 1.33 yd3 / 1.01 m3
- Bucket Width: 7.39 ft / 2250 mm
Published dimensions and weight
JCB 413S HT
The JCB 413S HT is a 9.1 t-class wheel loader with a 145.2 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight19958.5 lb9053 kg
03Selected published values48
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for JCB 413S HT include published bucket capacity of 1.57 yd3 / 1.2 m3, published breakout force of 16456.02 lb / 73.2 kN, published operating weight of 19958.5 lb / 9053 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (9.11 ft / 2775 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (1.57 yd3 / 1.2 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.33 yd3 / 1.01 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise9.11 ft2775 mm
Bucket Capacity - Heaped1.57 yd31.2 m3
Bucket Capacity - Struck1.33 yd31.01 m3
Bucket Width7.39 ft2250 mm
Breakout Force16456.02 lb73.2 kN
Dimensions
Ground Clearance1.16 ft351 mm
Length With Bucket On Ground21.41 ft6524 mm
Width Over Tires7.71 ft2347 mm
Height To Top Of Cab10.06 ft3064 mm
Wheelbase9.03 ft2750 mm
Hinge Pin - Max Height11.75 ft3579 mm
Reach At Max Lift And Dump3.08 ft937 mm
Engine
Emission Tier LevelTier 4 FinalTier 4 Final
Number Of Cylinders44
No. Of Valves44
Engine ModelJCB EcoMAX T4FJCB EcoMAX T4F
Air CleanerCyclonic pre filter with engine fan scavenge systemCyclonic pre filter with engine fan scavenge system
Gross Power145.2 hp108.3 kw
Power Measured @2200 rpm2200 rpm
Max Torque560 Nm560 Nm
Displacement293 cu in4.8 L
Torque Measured @1500 rpm1500 rpm
AspirationTurbo chargedTurbo charged
Operational
Def Tank Capacity5.3 gal20 L
Auxiliary Fuel Tank29.4 gal111 L
Full Turn Tipping Load12381.2 lb5616 kg
Payload6190.6 lb2808 kg
Operating Weight19958.5 lb9053 kg
Fuel Capacity30.7 gal116 L
Hydraulic System Fluid Capacity41 gal155 L
Turning Radius17.9 ft5445 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage100 amps100 amps
Rear Axle Oscillation11 degrees11 degrees
Articulation Angle40 degrees40 degrees
Transmission
Transmission Type6 speed non-lock up converter ZF 6WG1156 speed non-lock up converter ZF 6WG115
Number Of Forward Gears66
Number Of Reverse Gears33
Max Speed - Forward31.1 mph50 km/h
Max Speed - Reverse24.4 mph39.2 km/h
Hydraulic System
Max Operating Pressure240 bar240 bar
Relief Valve Setting3190 psi21994.3 kPa
Pump Flow Capacity41.3 gal/min156 L/min
Raise Time4.4 sec4.4 sec
Dump Time1.7 sec1.7 sec
Lower Time2.8 sec2.8 sec
Total Cycle8.9 sec8.9 sec
Pump TypeVariable placement piston pumpVariable placement piston pump
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.