- Dump Clearance At Max Raise: 8.99 ft / 2740 mm
- Bucket Capacity - Heaped: 2.1 yd3 / 1.6 m3
- Bucket Capacity - Struck: 1.71 yd3 / 1.3 m3
- Bucket Width: 8.14 ft / 2480 mm
Published dimensions and weight
Hitachi LX80-7
The Hitachi LX80-7 is a wheel loader of about 8.1 t, built around the DD-4BG1T engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight17901.6 lb8120 kg
03Selected published values41
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Hitachi LX80-7 include published bucket capacity of 2.1 yd3 / 1.6 m3, published breakout force of 17759.91 lb / 79 kN, published operating weight of 17901.6 lb / 8120 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (8.99 ft / 2740 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (2.1 yd3 / 1.6 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (1.71 yd3 / 1.3 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise8.99 ft2740 mm
Bucket Capacity - Heaped2.1 yd31.6 m3
Bucket Capacity - Struck1.71 yd31.3 m3
Bucket Width8.14 ft2480 mm
Breakout Force17759.91 lb79 kN
Dimensions
Ground Clearance1.2 ft365 mm
Length With Bucket On Ground20.87 ft6360 mm
Width Over Tires7.62 ft2320 mm
Height To Top Of Cab10.31 ft3140 mm
Wheelbase8.54 ft2600 mm
Hinge Pin - Max Height11.83 ft3605 mm
Reach At Max Lift And Dump3.38 ft1030 mm
Engine
Number Of Cylinders44
Engine Make23532353
Engine ModelDD-4BG1TDD-4BG1T
Net Power108 hp80.9 kw
Power Measured @2200 rpm2200 rpm
Displacement264.2 cu in4.4 L
AspirationTurbochargerTurbocharger
Operational
Operating Weight17901.6 lb8120 kg
Fuel Capacity41 gal155 L
Hydraulic System Fluid Capacity13.3 gal50 L
Engine Oil Fluid Capacity3.5 gal13 L
Cooling System Fluid Capacity6.1 gal23 L
Front Axle/Diff Fluid Capacity3.7 gal14 L
Rear Axle/Diff Fluid Capacity3.7 gal14 L
Static Tipping Weight13911.2 lb6310 kg
Turning Radius15.4 ft4690 mm
Operating Voltage24 V24 V
Alternator Supplied Amperage50 amps50 amps
Rear Axle Oscillation24 degrees24 degrees
Tire Size17.5-25-12PR (L2)17.5-25-12PR (L2)
Transmission
Transmission TypeTwo-speed shifts ; high/low speed selection through hydraulic clutchTwo-speed shifts ; high/low speed selection through hydraulic clutch
Max Speed - Forward21.5 mph34.5 km/h
Max Speed - Reverse21.5 mph34.5 km/h
Hydraulic System
Relief Valve Setting2132.1 psi14700 kPa
Pump Flow Capacity37.3 gal/min141 L/min
Raise Time5.6 sec5.6 sec
Dump Time1.2 sec1.2 sec
Lower Time3 sec3 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.