- Dump Clearance At Max Raise: 6.08 ft / 1850 mm
- Bucket Capacity - Heaped: 0.4 yd3 / 0.3 m3
- Bucket Capacity - Struck: 0.32 yd3 / 0.24 m3
- Bucket Width: 4.42 ft / 1350 mm
Published dimensions and weight
Hitachi LX15-7
The Hitachi LX15-7 is a wheel loader of about 1.9 t; its D1105-K2A engine is rated at 22 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight4221.9 lb1915 kg
03Selected published values40
Wheel loaders are commonly used to load, carry and stockpile loose material on prepared surfaces. Published rows for Hitachi LX15-7 include published bucket capacity of 0.4 yd3 / 0.3 m3, published breakout force of 4630 lb / 21 kN, published operating weight of 4221.9 lb / 1915 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Dump Clearance At Max Raise” field (6.08 ft / 1850 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Heaped” field (0.4 yd3 / 0.3 m3) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Capacity - Struck” field (0.32 yd3 / 0.24 m3) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Bucket
Dump Clearance At Max Raise6.08 ft1850 mm
Bucket Capacity - Heaped0.4 yd30.3 m3
Bucket Capacity - Struck0.32 yd30.24 m3
Bucket Width4.42 ft1350 mm
Breakout Force4630 lb21 kN
Dimensions
Ground Clearance0.71 ft215 mm
Length With Bucket On Ground11.29 ft3440 mm
Width Over Tires4.38 ft1335 mm
Height To Top Of Cab7.86 ft2395 mm
Wheelbase4.93 ft1500 mm
Hinge Pin - Max Height7.67 ft2335 mm
Reach At Max Lift And Dump1.88 ft570 mm
Engine
Number Of Cylinders33
Engine Make23342334
Engine ModelD1105-K2AD1105-K2A
Net Power22 hp16.2 kw
Power Measured @2500 rpm2500 rpm
Displacement68.6 cu in1.2 L
Operational
Operating Weight4221.9 lb1915 kg
Fuel Capacity8.8 gal33 L
Hydraulic System Fluid Capacity6.7 gal25 L
Engine Oil Fluid Capacity1.5 gal5.6 L
Cooling System Fluid Capacity1.5 gal5.5 L
Front Axle/Diff Fluid Capacity1 gal3.5 L
Rear Axle/Diff Fluid Capacity1 gal3.5 L
Static Tipping Weight2976.3 lb1350 kg
Turning Radius8.4 ft2545 mm
Operating Voltage12 V12 V
Alternator Supplied Amperage40 amps40 amps
Rear Axle Oscillation16 degrees16 degrees
Tire Size10-16.5-4PR (L2)10-16.5-4PR (L2)
Transmission
Transmission TypeHydrostatic transmission automatically controls power and speed with electrically controlledHydrostatic transmission automatically controls power and speed with electrically controlled
Max Speed - Forward9.3 mph15 km/h
Max Speed - Reverse9.3 mph15 km/h
Hydraulic System
Relief Valve Setting2987.8 psi20600 kPa
Pump Flow Capacity6.1 gal/min23 L/min
Raise Time4.6 sec4.6 sec
Dump Time1 sec1 sec
Lower Time3.2 sec3.2 sec
Pump Typegear typegear type
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.