- Ground Clearance: 7.01 in / 178 mm
- Wheelbase: 3.09 ft / 941 mm
- Bucket Hinge Pin: 112.01 in / 2845 mm
- Dump Angle: 40 degrees
Published dimensions and weight
New Holland L213
The New Holland L213 is a 2.3 t-class skid steer loader with a 46 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight5070.7 lb2300 kg
03Selected published values33
Skid-steer loaders are commonly used for loading, material handling and attachment work in confined areas. Published rows for New Holland L213 include published operating weight of 5070.7 lb / 2300 kg, the published “Ground Clearance” field of 7.01 in / 178 mm, the published “Wheelbase” field of 3.09 ft / 941 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Ground Clearance” field (7.01 in / 178 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (3.09 ft / 941 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Hinge Pin” field (112.01 in / 2845 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Ground Clearance7.01 in178 mm
Wheelbase3.09 ft941 mm
Bucket Hinge Pin112.01 in2845 mm
Dump Angle40 degrees40 degrees
Angle Of Departure22 degrees22 degrees
Rollback, Bucket At Full Height95 degrees95 degrees
Rollback, Bucket On Ground26 degrees26 degrees
Top Of Rops75.56 in1919 mm
Overall Width4.99 ft1518 mm
Bottom Of Level Bucket, Fully Raised105.6 in2682 mm
Engine
Air IntakeNaturally aspiratedNaturally aspirated
Fuel InjectionIndirectIndirect
Horsepower Per Sae J1349 Net46 hp34.4 kw
Horsepower Per Sae J1349 Gross49 hp36.6 kw
Engine ModelN844LN844L
Rated Speed2800 rpm2800 rpm
Peak Torque105.5 lb ft143 Nm
Displacement135.3 cu in2.3 L
Bore3.4 in84 mm
Stroke4 in100 mm
Capacities
Engine Oil With Filter1.9 gal7.1 L
Chain Tanks1.7 gal6.3 L
Fuel Tank16 gal60.5 L
Performance
Tipping Load2599.3 lb1179 kg
Operating Weight5070.7 lb2300 kg
Breakout Force, Bucket Cylinder4181.5 lb18.6 kN
Breakout Force, Lift Cylinder2855.1 lb12.7 kN
Rated Operating Load, 50% Tip1300.8 lb590 kg
Power Train
Travel Speed, Low Range7.4 mph12 km/h
Weights
Operating Weight5070.7 lb2300 kg
Shipping4762 lb2160 kg
Hydraulic System
Standard Pump Flow17.5 gal/min66.3 L/min
Relief Valve Pressure3046 psi21001.5 kPa
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.