- Ground Clearance: 8 in / 203 mm
- Bottom Of Level Bucket, Fully Raised: 105.08 in / 2669 mm
- Bucket Hinge Pin: 123 in / 3124 mm
- Clearance Circle Rear: 62.96 in / 1599 mm
Published dimensions and weight
New Holland C227
The New Holland C227 is a skid steer loader of about 3.8 t, powered by a 68 hp engine.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight8267.4 lb3750 kg
03Selected published values36
Skid-steer loaders are commonly used for loading, material handling and attachment work in confined areas. Published rows for New Holland C227 include published operating weight of 8267.4 lb / 3750 kg, the published “Ground Clearance” field of 8 in / 203 mm, the published “Bottom Of Level Bucket, Fully Raised” field of 105.08 in / 2669 mm. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Ground Clearance” field (8 in / 203 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bottom Of Level Bucket, Fully Raised” field (105.08 in / 2669 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Bucket Hinge Pin” field (123 in / 3124 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Ground Clearance8 in203 mm
Bottom Of Level Bucket, Fully Raised105.08 in2669 mm
Bucket Hinge Pin123 in3124 mm
Clearance Circle Rear62.96 in1599 mm
Clearance Circle Without Bucke50.75 in1289 mm
Dump Reach - General Purpose22.37 in568 mm
Ground Pressure9 psi62.06 kPa
Overall Width65.99 in1676 mm
Rollback, Bucket At Full Height99 degrees99 degrees
Rollback, Bucket On Ground31 degrees31 degrees
Top Of Rops78.67 in1998 mm
Angle Of Departure32 degrees32 degrees
Track On Ground55.87 in1419 mm
Engine
Horsepower, Net-Sae J134968 hp50.8 kw
Fuel InjectionHPCR DirectHPCR Direct
Horsepower Per Sae J1349 Gross74 hp55.2 kw
Engine ModelF5H FL463AF5H FL463A
Max Torque232 lb ft314.6 Nm
Torque Measured @1400 rpm1400 rpm
Displacement207.5 cu in3.4 L
Bore3.9 in99 mm
Stroke4.3 in109 mm
Capacities
Engine Oil W/ Filter Change2.3 gal8.5 L
Fuel Tank19.6 gal73.9 L
System Capacity With Filter8.6 gal32.2 L
Performance
Rated Operating Load, 35% Tip4166.8 lb1890 kg
Tipping Load5399.2 lb2449 kg
Operating Weight8267.4 lb3750 kg
Breakout Force, Bucket Cylinder7270 lb32.4 kN
Breakout Force, Lift Cylinder6069.9 lb27 kN
Rated Operating Load, 50% Tip2700.7 lb1225 kg
Power Train
Travel Speed, Low Range5.1 mph8.2 km/h
Travel Speed, High Range7.6 mph12.2 km/h
Hydraulic System
Optional High Flow324 gal/min1226.5 L/min
Relief Valve Pressure3046 psi21001.5 kPa
Pump Flow24.2 gal/min91.7 L/min
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.