- Length With Bucket: 10.58 ft / 3233 mm
- Width Over Tires: 5 ft / 1525 mm
- Ground Clearance: 8 in / 203.2 mm
- Height To Top Of Cab: 6.42 ft / 1950 mm
Published dimensions and weight
Caterpillar 226B Series 2
The Caterpillar 226B Series 2 is a skid steer loader of about 2.6 t; its 3024C T engine is rated at 57 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight5822 lb2640.9 kg
03Selected published values78
Skid-steer loaders are commonly used for loading, material handling and attachment work in confined areas. Published rows for Caterpillar 226B Series 2 include published bucket capacity of 0.4 yd3 / 0.3 m3, published breakout force of 4083 lb / 1852 kg, published operating weight of 5822 lb / 2640.9 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length With Bucket” field (10.58 ft / 3233 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (5 ft / 1525 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (8 in / 203.2 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length With Bucket10.58 ft3233 mm
Width Over Tires5 ft1525 mm
Ground Clearance8 in203.2 mm
Height To Top Of Cab6.42 ft1950 mm
Wheelbase3.25 ft986 mm
Length W/O Bucket8.25 ft2519 mm
Clearance At Max Lift And Dump7.08 ft2169 mm
Reach At Max Lift And Dump20 in505 mm
Length - Without Bucket99 in2514.6 mm
Maximum Dump Angle40 degrees40 degrees
Maximum Overall Height146 in3708.4 mm
Rack Back Angle - Maximum Height96.7 degrees96.7 degrees
Reach - Maximum Lift/Dump20 in508 mm
Maximum Reach - With Arms Parallel50.4 in1280.17 mm
Bucket Pin Height - Carry Position9.31 in236.22 mm
Bucket Pin Height - Maximum Lift9.34 in0.24 m
Bumper Overhang - Rear Axle38 in965.2 mm
Clearance At Maximum Lift And Dump85 in2159 mm
Departure Angle26 degrees26 degrees
Height - Top Of Cab6.42 ft0.17 m
Length - With Bucket On Ground127 in3225.8 mm
Turning Radius From Center - Inc Bucket76.41 in1940 mm
Turning Radius From Center - Machine Rear58.5 in1485 mm
Vehicle Width Over Tires60 in1524 mm
Wheel Base3.25 ft0.09 m
Turn Radius From Center - Bucket76.41 in1940.56 mm
Turn Radius From Center - Coupler47.2 in1198.89 mm
Turn Radius From Center - Rear58.5 in1485.9 mm
Operating Specifications
Rated Operating Capacity With Optional Counterweight1600 lb725.75 kg
Tipping Load3000 lb1360.78 kg
Breakout Force - Tilt Cylinder4083 lb1852.02 kg
Rated Operating Capacity1500 lb680.39 kg
Engine
Number Of Cylinders44
Engine Make22362236
Engine Model3024C T3024C T
Gross Power61 hp45.5 kw
Net Power57 hp42 kw
Power Measured @2600 rpm2600 rpm
Displacement134 cu in2.2 L
Bore3.3 in83.9 mm
Stroke3.9 in99.1 mm
Gross Power - Sae J199561 hp45.5 kw
Net Power - Sae 134956 hp41.8 kw
Net Flywheel Power56 hp41.8 kw
Operational
Operational Weight5822 lb2641 kg
Fuel Capacity15.4 gal58 L
Cooling System Fluid Capacity2.6 gal10 L
Engine Oil Fluid Capacity2.6 gal10 L
Max Speed7.8 mph12.6 km/h
Hydraulic System Fluid Capacity14.5 gal55 L
Chain Box Fluid Capacity - Each Side1.6 gal6 L
Operating Voltage12 V12 V
Alternator Supplied Amperage85 amps85 amps
Power Train
Travel Speed Forward7.8 mph12.6 km/h
Travel Speed Reverse7.8 mph12.6 km/h
Loader
Breakout Force4083 lb1852 kg
Operating Load Rating1500 lb680 kg
Tipping Angle3000 degrees3000 degrees
Bucket Capacity0.4 yd30.3 m3
Weights
Operating Weight5822 lb2640.9 kg
Hydraulic
Pump Flow Capacity15.6 gal/min60 L/min
Relief Valve Pressure3335 psi23000 kPa
Hydraulic System
Hydraulic Flow (1)StandardStandard
Hydraulic Power30.4 hp22.7 kw
Maximum Loader Hydraulic Flow26 gal/min26 gal/min
Maximum Loader Hydraulic Pressure3335 psi3335 psi
Loader Hydraulic Pressure3335 psi3335 psi
Loader Hydraulic Flow15.6 gal/min15.6 gal/min
Hydraulic Flow (2)High FlowHigh Flow
Service Refill Capacities
Cooling System2.6 gal9.9 L
Fuel Tank15.4 gal58.3 L
Hydraulic Tank9.2 gal34.9 L
Engine Crankcase2.6 gal9.9 L
Hydraulic System14.5 gal54.9 L
Chain Box - Each Side1.6 gal6.1 L
Cab
RopsSAE J1040 MAY94, ISO 3471:1994SAE J1040 MAY94, ISO 3471:1994
FopsSAE J1043 SEPT87, ISO 3449:1992 Level ISAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level IiSAE J231 JAN81, ISO 3449:1992 Level IISAE J231 JAN81, ISO 3449:1992 Level II
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.