- Length With Bucket: 10.88 ft / 3314 mm
- Width Over Tires: 6.01 ft / 1829 mm
- Ground Clearance: 7.7 in / 195.58 mm
- Height To Top Of Cab: 6.4 ft / 1950 mm
Published dimensions and weight
Caterpillar 216
The Caterpillar 216 is a skid steer loader of about 2.5 t; its 3024C engine is rated at 48 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Operating Weight5490 lb2490.3 kg
03Selected published values57
Skid-steer loaders are commonly used for loading, material handling and attachment work in confined areas. Published rows for Caterpillar 216 include published bucket capacity of 0.5 yd3 / 0.4 m3, published operating weight of 5490 lb / 2490.3 kg, published engine power of 51 hp / 38.1 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Length With Bucket” field (10.88 ft / 3314 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (6.01 ft / 1829 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Ground Clearance” field (7.7 in / 195.58 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Length With Bucket10.88 ft3314 mm
Width Over Tires6.01 ft1829 mm
Ground Clearance7.7 in195.58 mm
Height To Top Of Cab6.4 ft1950 mm
Wheelbase3.24 ft986 mm
Length W/O Bucket8.27 ft2519 mm
Clearance At Max Lift And Dump7.12 ft2168 mm
Reach At Max Lift And Dump21.5 in546 mm
Wheel Base3.24 ft0.09 m
Bucket Pin Height - Carry Position9.31 in236.22 mm
Clearance At Maximum Lift And Dump85.4 in2169.16 mm
Length - Without Bucket99 in2514.6 mm
Bucket Pin Height - Maximum Lift9.37 in0.24 m
Maximum Overall Height146 in3708.4 mm
Height - Top Of Cab6.42 ft0.17 m
Bumper Overhang - Rear Axle38 in965.2 mm
Reach - Maximum Lift/Dump20 in508 mm
Turning Radius From Center - Inc Bucket79.38 in2016 mm
Length - With Bucket On Ground127 in3225.8 mm
Vehicle Width Over Tires60 in1524 mm
Operating Specifications
Breakout Force - Tilt Cylinder3612 lb1638.38 kg
Breakout Force - Lift Cylinder2873 lb1303.18 kg
Rated Operating Capacity1400 lb635.03 kg
Rated Operating Capacity With Optional Counterweight1500 lb680.39 kg
Tipping Load2800 lb1270.06 kg
Engine
Number Of Cylinders44
Engine Make22362236
Engine Model3024C3024C
Gross Power51 hp38.1 kw
Net Power48 hp35.8 kw
Power Measured @3000 rpm3000 rpm
Displacement134 cu in2.2 L
Bore3.4 in84.1 mm
Stroke4 in100.1 mm
Net Flywheel Power48 hp35.8 kw
Operational
Operational Weight5740 lb2603.7 kg
Fuel Capacity17.2 gal65 L
Max Speed7 mph11.3 km/h
Hydraulic System Fluid Capacity14.6 gal55 L
Operating Speed7 mph11.3 km/h
Loader
Operating Load Rating1400 lb635.1 kg
Tipping Angle2600 degrees2600 degrees
Bucket Capacity0.5 yd30.4 m3
Weights
Operating Weight5490 lb2490.3 kg
Hydraulic
Pump Flow Capacity15.2 gal/min57.2 L/min
Hydraulic System
Loader Hydraulic Pressure3100 psi3100 psi
Loader Hydraulic Flow14.7 gal/min14.7 gal/min
Hydraulic FlowStandard flowStandard flow
Service Refill Capacities
Cooling System2.4 gal9.1 L
Fuel Tank17 gal64.4 L
Hydraulic Tank9.2 gal34.9 L
Engine Crankcase2.1 gal8 L
Hydraulic System14.5 gal54.9 L
Chain Box - Each Side1.6 gal6.1 L
Cab
RopsSAE J1040 MAY94 and ISO3471:1994SAE J1040 MAY94 and ISO3471:1994
FopsSAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level ISAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level IiSAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.