- Overall Length: 31.3 ft / 9540 mm
- Width Over Tires: 8.21 ft / 2500 mm
- Wheelbase: 23.96 ft / 7300 mm
- Tandem Axle Wheelbase: 5.06 ft / 1540 mm
Published dimensions and weight
Dressta RD200C
The Dressta RD200C is a motor grader; its QSB 6.7 engine is rated at 178 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total80195.4 lb36376 kg
03Selected published values48
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Dressta RD200C include published moldboard width of 12.1 ft / 3660 mm, published maximum power of 178 hp / 132.8 kw, published operating weight of 80195.4 lb / 36376 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (31.3 ft / 9540 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.21 ft / 2500 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (23.96 ft / 7300 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length31.3 ft9540 mm
Width Over Tires8.21 ft2500 mm
Wheelbase23.96 ft7300 mm
Tandem Axle Wheelbase5.06 ft1540 mm
Blade Base10.01 ft3050 mm
Height To Top Of Isomount Cab10.83 ft3300 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB 6.7QSB 6.7
Power Measured @2400 rpm2400 rpm
Net Power Gear 5-6178 hp132.8 kw
Torque Measured @1500 rpm1500 rpm
Max Power178 hp132.8 kw
Net Torque Gears 5-6685.2 lb ft929 Nm
Displacement409 cu in6.8 L
Aspirationturbocharged and CACturbocharged and CAC
Operational
Hydraulic System Fluid Capacity34.4 gal130 L
Std Operation Weight - Total80195.4 lb36376 kg
Fuel Capacity100.4 gal380 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity9.3 gal35 L
Rear Diff/Final Drive Fluid Capacity2 gal7.5 L
Tandem Case Fluid Capacity (Each)8 gal30 L
Tire Size14.00 - 24 G-2 16PR14.00 - 24 G-2 16PR
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Steering
Articulation Angle25 degrees25 degrees
Turning Radius24606.3 ft7500 m
Transmission
Transmission Typepowershift transmissionpowershift transmission
Number Of Gears - Forward66
Number Of Gears - Reverse33
Max Speed - Forward27.8 mph44.7 km/h
Max Speed - Reverse19.6 mph31.4 km/h
Front Axle
Wheel Lean22 degrees22 degrees
Oscillation - Total40 degrees40 degrees
Ground Clearance1.9 ft550 mm
Moldboard
Moldboard Width12.1 ft3660 mm
Moldboard Height26.4 in670 mm
Moldboard Thickness0.9 in22 mm
Max Depth Of Cut13.8 in350 mm
Side Shift Left31.5 in800 mm
Side Shift Right31.5 in800 mm
Hydraulic System
Pump Typeaxial piston pumpaxial piston pump
Pump Flow21.2 gal/min80 L/min
Relief Valve Pressure2030.6 psi14000 kPa
Circle
Diameter53.2 in1350 mm
Rotation360 degrees360 degrees
Max Lift Above Ground19.7 in500 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.