- Overall Length: 28.55 ft / 8700 mm
- Width Over Tires: 8.37 ft / 2550 mm
- Wheelbase: 20.84 ft / 6350 mm
- Tandem Axle Wheelbase: 4.92 ft / 1498 mm
Published dimensions and weight
Dressta RD165C
The Dressta RD165C is a motor grader; its QSB 6.7 engine is rated at 160 hp.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total31526.2 lb14300 kg
03Selected published values48
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Dressta RD165C include published moldboard width of 12 ft / 3640 mm, published maximum power of 160 hp / 119.4 kw, published operating weight of 31526.2 lb / 14300 kg. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.55 ft / 8700 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Width Over Tires” field (8.37 ft / 2550 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.84 ft / 6350 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.55 ft8700 mm
Width Over Tires8.37 ft2550 mm
Wheelbase20.84 ft6350 mm
Tandem Axle Wheelbase4.92 ft1498 mm
Blade Base8.54 ft2600 mm
Height To Top Of Isomount Cab11.49 ft3500 mm
Engine
Number Of Cylinders66
Engine Make23472347
Engine ModelQSB 6.7QSB 6.7
Power Measured @2500 rpm2500 rpm
Net Power Gear 5-6160 hp119.4 kw
Torque Measured @1500 rpm1500 rpm
Max Power160 hp119.4 kw
Net Torque Gears 5-6590.1 lb ft800 Nm
Displacement408.9 cu in6.7 L
Aspirationturbocharged and CACturbocharged and CAC
Operational
Hydraulic System Fluid Capacity31 gal117 L
Std Operation Weight - Total31526.2 lb14300 kg
Fuel Capacity85.9 gal325 L
Cooling System Fluid Capacity10.6 gal40 L
Transmission Fluid Capacity9.3 gal35 L
Rear Diff/Final Drive Fluid Capacity9.3 gal35 L
Tandem Case Fluid Capacity (Each)6.7 gal25 L
Tire Size16.9-24 IND TI04 12PR16.9-24 IND TI04 12PR
Operating Voltage24 V24 V
Alternator Supplied Amperage75 amps75 amps
Steering
Articulation Angle27 degrees27 degrees
Turning Radius23 ft7 m
Transmission
Transmission Typepowershift transmissionpowershift transmission
Number Of Gears - Forward66
Number Of Gears - Reverse33
Max Speed - Forward24.9 mph40 km/h
Max Speed - Reverse16.8 mph27 km/h
Front Axle
Wheel Lean22 degrees22 degrees
Oscillation - Total40 degrees40 degrees
Ground Clearance2 ft600 mm
Moldboard
Moldboard Width12 ft3640 mm
Moldboard Height25.6 in650 mm
Moldboard Thickness0.7 in16 mm
Max Depth Of Cut13.8 in350 mm
Side Shift Left31.5 in800 mm
Side Shift Right31.5 in800 mm
Hydraulic System
Pump Typeaxial piston pumpaxial piston pump
Pump Flow16.3 gal/min61.6 L/min
Relief Valve Pressure2030.6 psi14000 kPa
Circle
Diameter53.2 in1350 mm
Rotation360 degrees360 degrees
Max Lift Above Ground19.7 in500 mm
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.