- Overall Length: 28.34 ft / 8636 mm
- Wheelbase: 20.5 ft / 6248 mm
- Blade Base: 8.92 ft / 2718 mm
- Overall Height With Cab: 11.17 ft / 3404 mm
Published dimensions and weight
Champion 740
The Champion 740 is a motor grader built around the M11 engine (210 hp).
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total34210 lb15517.4 kg
03Selected published values52
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Champion 740 include published moldboard width of 12.1 ft / 3658 mm, published operating weight of 34210 lb / 15517.4 kg, published engine power of 210 hp / 156.6 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (28.34 ft / 8636 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20.5 ft / 6248 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Blade Base” field (8.92 ft / 2718 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length28.34 ft8636 mm
Wheelbase20.5 ft6248 mm
Blade Base8.92 ft2718 mm
Overall Height With Cab11.17 ft3404 mm
Overall Width8.34 ft2540 mm
Tread Width84.1 in2136 mm
Engine
Number Of Cylinders66
Gross Horsepower225 hp167.8 kw
Engine MakeCumminsCummins
Engine ModelM11M11
Net Power210 hp156.6 kw
Power Measured @2100 rpm2100 rpm
Torque Measured @1300 rpm1300 rpm
Displacement659.1 cu in10.8 L
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle10312 lb4677.5 kg
Hydraulic System Fluid Capacity23.8 gal90 L
Std Operation Weight - Rear Axle23898 lb10840 kg
Std Operation Weight - Total34210 lb15517.4 kg
Oil System Fluid Capacity10.4 gal39 L
Fuel Capacity100 gal378.5 L
Cooling System Fluid Capacity12.7 gal48 L
Transmission Fluid Capacity10.3 gal38.8 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size14.00 * 24, G-214.00 * 24, G-2
Steering
Articulation Angle22 degrees22 degrees
Turning Radius35.1 ft10.7 m
Transmission
Transmission TypePowershiftPowershift
Max Speed - Forward26.6 mph42.8 km/h
Max Speed - Reverse19.3 mph31 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2.1 ft610 mm
Moldboard
Max Reach Outside - Left9.8 ft2973 mm
Max Reach Outside - Right9.5 ft2870 mm
Moldboard Width12.1 ft3658 mm
Moldboard Height29.1 in737 mm
Moldboard Thickness1 in25 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Hydraulic System
Pump Flow48.3 gal/min182.9 L/min
Relief Valve Pressure2500 psi17236.9 kPa
Circle
Blade Ground Clearance1.5 ft432 mm
Blade Cutting Depth2.5 ft762 mm
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left26 in660 mm
Shift Right24.1 in610 mm
Max Lift Above Ground20 in508 mm
Blade Tip Angle - Front48 degrees48 degrees
Blade Tip Angle - Rear2.5 degrees2.5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.