- Overall Length: 27.75 ft / 8458 mm
- Wheelbase: 20 ft / 6096 mm
- Blade Base: 8.59 ft / 2616 mm
- Overall Height With Cab: 11.09 ft / 3378 mm
Published dimensions and weight
Champion 710A
Rated at 140 hp, the Champion 710A is a motor grader.
01Published dimensions and weight
Dimensions reference
Measurement reference — not to scale
01Dimensions referenceLength × width × height
02Std Operation Weight - Total30630 lb13893.6 kg
03Selected published values58
Motor graders are commonly used to shape, level and maintain roads, pads and drainage surfaces. Published rows for Champion 710A include published moldboard width of 12.1 ft / 3658 mm, published operating weight of 30630 lb / 13893.6 kg, published engine power of 140 hp / 104.4 kw. These values describe the published configuration; verify the specific machine's configuration, attachments and records.
- Compare the published “Overall Length” field (27.75 ft / 8458 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Wheelbase” field (20 ft / 6096 mm) with the specific machine's configuration and records; options and condition can differ.
- Compare the published “Blade Base” field (8.59 ft / 2616 mm) with the specific machine's configuration and records; options and condition can differ.
02Specifications
Published values, clearly grouped.
Published specifications and measurements are organized by section for quick reference.
Dimensions
Overall Length27.75 ft8458 mm
Wheelbase20 ft6096 mm
Blade Base8.59 ft2616 mm
Overall Height With Cab11.09 ft3378 mm
Overall Width8.17 ft2489 mm
Tread Width82.01 in2083 mm
Engine
Torque440 lb ft596.6 Nm
Number Of Cylinders66
Gross Horsepower148 hp110.4 kw
Engine MakeCumminsCummins
Engine Model6B5.96B5.9
Net Power140 hp104.4 kw
Power Measured @2200 rpm2200 rpm
Torque Measured @1600 rpm1600 rpm
Displacement360.1 cu in5.9 L
Bore4.1 in102 mm
Stroke4.8 in120 mm
AspirationTurbochargedTurbocharged
Operational
Std Operation Weight - Front Axle9400 lb4263.8 kg
Hydraulic System Fluid Capacity23.8 gal90 L
Std Operation Weight - Rear Axle21230 lb9629.8 kg
Std Operation Weight - Total30630 lb13893.6 kg
Oil System Fluid Capacity4.4 gal16.4 L
Fuel Capacity100 gal378.5 L
Cooling System Fluid Capacity11.7 gal44 L
Transmission Fluid Capacity10.3 gal38.8 L
Rear Diff/Final Drive Fluid Capacity6.1 gal23 L
Tandem Case Fluid Capacity (Each)26.5 gal100 L
Tire Size13.00 * 24, G-213.00 * 24, G-2
Steering
Articulation Angle22 degrees22 degrees
Turning Radius25.5 ft7.8 m
Transmission
Transmission TypePowershiftPowershift
Number Of Gears - Forward88
Number Of Gears - Reverse44
Max Speed - Forward24.5 mph39.4 km/h
Max Speed - Reverse17.8 mph28.6 km/h
Front Axle
Wheel Lean18 degrees18 degrees
Oscillation - Total16 degrees16 degrees
Ground Clearance2 ft597 mm
Moldboard
Max Reach Outside - Left10 ft3035 mm
Max Reach Outside - Right10.1 ft3061 mm
Moldboard Width12.1 ft3658 mm
Moldboard Height25 in635 mm
Moldboard Thickness0.9 in22 mm
Side Shift Left26.5 in673 mm
Side Shift Right26.5 in673 mm
Blade Pull At Max Weight19109.7 lb8668 kg
Blade Down Pressure16495 lb7482 kg
Hydraulic System
Pump Flow50.5 gal/min191.2 L/min
Relief Valve Pressure2500 psi17236.9 kPa
Circle
Blade Ground Clearance1.5 ft432 mm
Blade Cutting Depth2.8 ft826 mm
Diameter66.3 in1683 mm
Rotation360 degrees360 degrees
Shift Left30.6 in775 mm
Shift Right29.5 in749 mm
Blade Tip Angle - Front47 degrees47 degrees
Blade Tip Angle - Rear5 degrees5 degrees
Need the machine, not just the numbers?
Find one, value one, or tell the market what you need.
Manufacturer-published specifications.